lkml.org 
[lkml]   [2014]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Freeing of dev->p
On Wed, Jan 08, 2014 at 09:33:30PM +0100, Jean Delvare wrote:
> On Wed, 8 Jan 2014 08:56:28 -0800, Greg Kroah-Hartman wrote:
> > On Wed, Jan 08, 2014 at 04:40:58PM +0100, Jean Delvare wrote:
> > > Hi Greg, hi all,
> > >
> > > A memory leak has been reported to me:
> > > http://marc.info/?l=linux-i2c&m=138779165123331&w=2
> > >
> > > The leak is in i801_probe, caused by an early call to
> > > i2c_set_adapdata() which in turn calls dev_set_drvdata() which
> > > allocates some memory in device_private_init(). That memory is only
> > > freed by the driver core when the i2c_adapter class device is removed.
> > > But if the parent (PCI) device probing itself fails for whatever
> > > reason, the class device never gets to be created, so it's never
> > > removed, thus the memory is never freed.
> > >
> > > It is not possible to move the call to i2c_set_adapdata() until after
> > > the class device is created, because the data pointed is needed very
> > > early after (almost during) i2c adapter creation. So I could make the
> > > leak less likely to happen but I can't fix it completely.
> >
> > I don't understand, what exactly is leaking? You have control over your
> > own structures, so can't you clean things up on the error path if you
> > know something went wrong?
>
> I do, but I can only care for memory I allocated myself, not the memory
> allocated by the driver core.
>
> > > I am wondering how this can be solved, and this brought three questions:
> > >
> > > 1* What is the rationale for allocating dev->p dynamically? It is
> > > allocated as soon as the device is created (in device_add), so as far
> > > as I can see every device will need the allocation. Including struct
> > > device_private in struct device would not cost more memory, plus it
> > > would reduce memory fragmentation. So is this a lifetime issue? Or
> > > something else I can't think of?
> >
> > I did it to keep things that non-driver-core code should not be
> > touching. Previously, lots of people messed around with the device
> > private fields that could confuse the driver core. Ideally, I'd like to
> > be able to move the kobject itself into this structure, to allow devices
> > to handle static initialization better, but that never happened, unlike
> > other driver core structures.
> >
> > > 2* What is the rationale for making void *driver_data part of struct
> > > device_private and not struct device itself?
> >
> > To "hide" information / details that non-driver core code should not
> > care about or touch.
>
> This is a respectable goal, but I'm unsure it's worth the price...
>
> > > 3* If the current implementation is considered correct, does it mean
> > > that dev_set_drvdata() should never be used for class devices?
> >
> > No, it should be fine, I don't understand the issue with your usage that
> > is causing the problem, care to explain it better, or point me at some
> > code?
>
> Sorry I wasn't clear. Let me guide you step by step with the real-world
> example that caused me to look into this. It all starts in
> drivers/i2c/busses/i2c-i801.c, function i801_probe(). This is a driver
> for a PCI device implementing an SMBus controller (aka i2c_adapter.)
>
> static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
> {
> int err;
> struct i801_priv *priv;
>
> priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> i2c_set_adapdata(&priv->adapter, priv);
>
> So we allocate private data for the i2c_adapter we're about to create.
> i2c_set_adapdata() is a wrapper around dev_set_drvdata() for class
> devices of type i2c_adapter. If everything goes well, we would end up
> doing:
>
> err = i2c_add_adapter(&priv->adapter);
>
> and everything would be fine. However, there are a number of things
> that can go wrong in between, for example if an ACPI resource conflict
> is detected:
>
> err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
> if (err) {
> err = -ENODEV;
> goto exit;
> }
>
> (...)
> exit:
> kfree(priv);
> return err;
> }
>
> As you can see, we properly free the memory we allocated ourselves for
> the i2c_adapter's data on the error path. You'd think we're alright
> then, but we're not. The problem is that i2c_set_adapdata() indirectly
> allocated some memory:
>
> static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
> {
> dev_set_drvdata(&dev->dev, data);
> }
>
> int dev_set_drvdata(struct device *dev, void *data)
> {
> int error;
>
> if (!dev->p) {
> error = device_private_init(dev);
> if (error)
> return error;
> }
> dev->p->driver_data = data;
> return 0;
> }
>
> int device_private_init(struct device *dev)
> {
> dev->p = kzalloc(sizeof(*dev->p), GFP_KERNEL);
> (...)
> }
>
> In the success case, it's fine because the memory gets freed at device
> release time in:
>
> static void device_release(struct kobject *kobj)
> {
> struct device *dev = kobj_to_dev(kobj);
> struct device_private *p = dev->p;
>
> (...)
> kfree(p);
> }
>
> However in the error case, device_release() will never get called, so
> dev->p is leaked. This is what I am worried about.
>
> I hope I was clear enough this time :) If not I'll try harder.

Nope, that was great, I understand it all now.

> I consider allocating memory in dev_set_drvdata() very misleading, I
> don't think we should keep doing that.

I had to add that later on when it was found that people were setting
private data fields before allocating or initializing the structure,
much like you are doing here.

Which should be fine, except for the big problem you have pointed out.

Hm, let me think about this. If we move driver_data back out of the
private section of the device, we should be ok, but give me a day or so
to think about it some more...

thanks,

greg k-h


\
 
 \ /
  Last update: 2014-01-10 06:01    [W:0.060 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site