lkml.org 
[lkml]   [2014]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/9] USB Host support for OMAP5 uEVM (for 3.14)
Date
Hi Benoit & Tony,

This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.

It depends on the TI Clock DT conversion patches [1] and is based
on 3.13-rc7

[1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895

NOTE: I've tested this only on the OMAP5 uEVM board. Since the patchset
changes could affect OMAP3/4, it must be verified at least on
a Beagleboard and a Panda board before being pulled in.
I request someone to verify this on OMAP3/4 since I don't have access
to those boards at the moment. Thanks.

Changelog:

v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll

v4:
- Updated DT binding document for clock binding

v3:
- Rebased on top of 3.13-rc7

cheers,
-roger

Roger Quadros (9):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()

.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 6 +
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 6 +
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 172 ++++++++++-----------
8 files changed, 128 insertions(+), 121 deletions(-)

--
1.8.3.2



\
 
 \ /
  Last update: 2014-01-09 13:41    [W:0.288 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site