lkml.org 
[lkml]   [2014]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb:hub set hub->change_bits when over-current happens
On Wed, Jan 08, 2014 at 12:49:57PM -0500, Alan Stern wrote:
> On Wed, 8 Jan 2014, Greg KH wrote:
>
> > On Wed, Jan 08, 2014 at 02:45:42PM +0800, Shen Guang wrote:
> > > When we are doing compliance test with xHCI, we found that if we
> > > enable CONFIG_USB_SUSPEND and plug in a bad device which causes
> > > over-current condition to the root port, software will not be noticed.
> > > The reason is that current code don't set hub->change_bits in
> > > hub_activate() when over-current happens, and then hub_events() will
> > > not check the port status because it thinks nothing changed.
> > > If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will
> > > report the change and set hub->event_bits, and then hub_events() will
> > > check what events happened.In this case over-current can be detected.
> > >
> > > Signed-off-by: Shen Guang <shenguang10@gmail.com>
> > > ---
> > > drivers/usb/core/hub.c | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > > index bd9dc35..98b5679 100644
> > > --- a/drivers/usb/core/hub.c
> > > +++ b/drivers/usb/core/hub.c
> > > @@ -1154,7 +1154,8 @@ static void hub_activate(struct usb_hub *hub,
> > > enum hub_activation_type type)
> > > /* Tell khubd to disconnect the device or
> > > * check for a new connection
> > > */
> > > - if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
> > > + if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
> > > + (portstatus & USB_PORT_STAT_OVERCURRENT))
> > > set_bit(port1, hub->change_bits);
> > >
> > > } else if (portstatus & USB_PORT_STAT_ENABLE) {
> > > --
> > > 1.7.9.5
> >
> > Alan and Sarah, any objection to this patch?
>
> It seems okay to me.
>
> Acked-by: Alan Stern <stern@rowland.harvard.edu>

Looks fine to me as well.

Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>


\
 
 \ /
  Last update: 2014-01-08 20:01    [W:0.088 / U:1.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site