lkml.org 
[lkml]   [2014]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 3/9] devicetree: bindings: Document qcom,saw2 node
On Wed, Jan 08, 2014 at 02:36:26PM +0000, Mark Rutland wrote:
> On Tue, Dec 24, 2013 at 12:39:47AM +0000, Stephen Boyd wrote:
> > The saw2 binding describes the SPM/AVS wrapper hardware used to
> > control the regulator supplying voltage to the Krait CPUs.
> >
> > Cc: <devicetree@vger.kernel.org>
> > Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> > ---
> > .../devicetree/bindings/arm/msm/qcom,saw2.txt | 35 ++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
> >
> > diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
> > new file mode 100644
> > index 0000000..1505fb8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
> > @@ -0,0 +1,35 @@
> > +SPM AVS Wrapper 2 (SAW2)
> > +
> > +The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
> > +Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
> > +micro-controller that transitions a piece of hardware (like a processor or
> > +subsystem) into and out of low power modes via a direct connection to
> > +the PMIC. It can also be wired up to interact with other processors in the
> > +system, notifying them when a low power state is entered or exited.
> > +
> > +PROPERTIES
> > +
> > +- compatible:
> > + Usage: required
> > + Value type: <string>
> > + Definition: shall contain "qcom,saw2". A more specific value should be
> > + one of:
> > + "qcom,saw2-v1"
> > + "qcom,saw2-v1.1"
> > + "qcom,saw2-v2"
> > + "qcom,saw2-v2.1"
> > +
> > +- reg:
> > + Usage: required
> > + Value type: <prop-encoded-array>
> > + Definition: the first element specifies the base address and size of
> > + the register region. An optional second element specifies
> > + the base address and size of the alias register region.
> > +
> > +
> > +Example:
> > +
> > + regulator@2099000 {
> > + compatible = "qcom,saw2";
> > + reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
> > + };
> I have the same general worry as with the ACC regarding the implicit
> relationship between CPUs and the registers controlling them, but I
> assume that's fine for current implementations, and the binding's so
> simple there's nothing preventing future extension.

Having looked at the dts files I see each CPU has its own SAW phandle,
so the above comments are irrelevant.

Thanks,
Mark.


\
 
 \ /
  Last update: 2014-01-08 17:21    [W:0.119 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site