lkml.org 
[lkml]   [2014]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 3/9] devicetree: bindings: Document qcom,saw2 node
On Tue, Dec 24, 2013 at 12:39:47AM +0000, Stephen Boyd wrote:
> The saw2 binding describes the SPM/AVS wrapper hardware used to
> control the regulator supplying voltage to the Krait CPUs.
>
> Cc: <devicetree@vger.kernel.org>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
> .../devicetree/bindings/arm/msm/qcom,saw2.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
> new file mode 100644
> index 0000000..1505fb8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
> @@ -0,0 +1,35 @@
> +SPM AVS Wrapper 2 (SAW2)
> +
> +The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
> +Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
> +micro-controller that transitions a piece of hardware (like a processor or
> +subsystem) into and out of low power modes via a direct connection to
> +the PMIC. It can also be wired up to interact with other processors in the
> +system, notifying them when a low power state is entered or exited.
> +
> +PROPERTIES
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: shall contain "qcom,saw2". A more specific value should be
> + one of:
> + "qcom,saw2-v1"
> + "qcom,saw2-v1.1"
> + "qcom,saw2-v2"
> + "qcom,saw2-v2.1"
> +
> +- reg:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: the first element specifies the base address and size of
> + the register region. An optional second element specifies
> + the base address and size of the alias register region.
> +
> +
> +Example:
> +
> + regulator@2099000 {
> + compatible = "qcom,saw2";
> + reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
> + };
I have the same general worry as with the ACC regarding the implicit
relationship between CPUs and the registers controlling them, but I
assume that's fine for current implementations, and the binding's so
simple there's nothing preventing future extension.

Acked-By: Mark Rutland <mark.rutland@arm.com>

Thanks,
Mark.


\
 
 \ /
  Last update: 2014-01-08 16:21    [W:0.212 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site