lkml.org 
[lkml]   [2014]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/5] mfd: omap-usb-host: Update DT clock binding information
Date
The omap-usb-host driver expects the 60MHz functional clock
of the USB host module to be named as "init_60m_fclk".
Add this information in the DT binding document.

CC: Lee Jones <lee.jones@linaro.org>
CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
index b381fa6..5635202 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -32,6 +32,10 @@ Optional properties:
- single-ulpi-bypass: Must be present if the controller contains a single
ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1

+- clocks: phandle to 60MHz functional clock to the USB Host module.
+
+- clock-names: must be "init_60m_fclk"
+
Required properties if child node exists:

- #address-cells: Must be 1
--
1.8.3.2


\
 
 \ /
  Last update: 2014-01-08 08:01    [W:1.814 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site