lkml.org 
[lkml]   [2014]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.12 134/144] gpio: twl4030: Fix regression for twl gpio LED output
Date
3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>

commit f5837ec11f8cfa6d53ebc5806582771b2c9988c6 upstream.

Commit 0b2aa8be introduced a regression that causes failure
in setting LED GPO direction to OUT.

This causes USB host probe failures for Beagleboard C4.

platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral
hsusb2_vcc: Failed to request enable GPIO510: -22
reg-fixed-voltage reg-fixed-voltage.0.auto: Failed to register regulator: -22
reg-fixed-voltage: probe of reg-fixed-voltage.0.auto failed with error -22

direction_out/direction_in must return 0 if the operation succeeded.

Also, don't update direction flag and output data if twl4030_set_gpio_direction()
failed inside twl_direction_out();

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpio/gpio-twl4030.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -300,7 +300,7 @@ static int twl_direction_in(struct gpio_
if (offset < TWL4030_GPIO_MAX)
ret = twl4030_set_gpio_direction(offset, 1);
else
- ret = -EINVAL;
+ ret = -EINVAL; /* LED outputs can't be set as input */

if (!ret)
priv->direction &= ~BIT(offset);
@@ -354,11 +354,20 @@ static void twl_set(struct gpio_chip *ch
static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
- int ret = -EINVAL;
+ int ret = 0;

mutex_lock(&priv->mutex);
- if (offset < TWL4030_GPIO_MAX)
+ if (offset < TWL4030_GPIO_MAX) {
ret = twl4030_set_gpio_direction(offset, 0);
+ if (ret) {
+ mutex_unlock(&priv->mutex);
+ return ret;
+ }
+ }
+
+ /*
+ * LED gpios i.e. offset >= TWL4030_GPIO_MAX are always output
+ */

priv->direction |= BIT(offset);
mutex_unlock(&priv->mutex);



\
 
 \ /
  Last update: 2014-01-07 01:21    [W:0.366 / U:2.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site