lkml.org 
[lkml]   [2014]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/6][v3] phylib: Add Clause 45 read/write functions
Date
Hi, All,

I saw the state of this patch sets were set to "Deferred", may I know if there is any plan or request for these patches, or is there a big picture for supporting 10G PHYs?

Best Regards,
Shaohui Xie


> -----Original Message-----
> From: shh.xie@gmail.com [mailto:shh.xie@gmail.com]
> Sent: Friday, November 29, 2013 1:45 PM
> To: davem@davemloft.net; jg1.han@samsung.com; mugunthanvnm@ti.com;
> f.fainelli@gmail.com; netdev@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Cc: Xie Shaohui-B21989
> Subject: [PATCH 1/6][v3] phylib: Add Clause 45 read/write functions
>
> From: Andy Fleming <afleming@freescale.com>
>
> Need an extra parameter to read or write Clause 45 PHYs, so need a
> different API with the extra parameter.
>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
> ---
> v3 changes: add C45 check.
>
> include/linux/phy.h | 39 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/include/linux/phy.h b/include/linux/phy.h index
> 48a4dc3..0ff2476 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -498,6 +498,24 @@ static inline int phy_read(struct phy_device *phydev,
> u32 regnum) }
>
> /**
> + * phy_read_mmd - Convenience function for reading a register
> + * from an MMD on a given PHY.
> + * @phydev: The phy_device struct
> + * @devad: The MMD to read from
> + * @regnum: The register on the MMD to read
> + *
> + * Same rules as for phy_read();
> + */
> +static inline int phy_read_mmd(struct phy_device *phydev, int devad,
> +u32 regnum) {
> + if (!phydev->is_c45)
> + return -EOPNOTSUPP;
> +
> + return mdiobus_read(phydev->bus, phydev->addr,
> + MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff)); }
> +
> +/**
> * phy_write - Convenience function for writing a given PHY register
> * @phydev: the phy_device struct
> * @regnum: register number to write
> @@ -533,6 +551,27 @@ static inline bool phy_is_internal(struct phy_device
> *phydev)
> return phydev->is_internal;
> }
>
> +/**
> + * phy_write_mmd - Convenience function for writing a register
> + * on an MMD on a given PHY.
> + * @phydev: The phy_device struct
> + * @devad: The MMD to read from
> + * @regnum: The register on the MMD to read
> + * @val: value to write to @regnum
> + *
> + * Same rules as for phy_write();
> + */
> +static inline int phy_write_mmd(struct phy_device *phydev, int devad,
> + u32 regnum, u16 val)
> +{
> + if (!phydev->is_c45)
> + return -EOPNOTSUPP;
> +
> + regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff);
> +
> + return mdiobus_write(phydev->bus, phydev->addr, regnum, val); }
> +
> struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int
> phy_id,
> bool is_c45, struct phy_c45_device_ids *c45_ids); struct
> phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
> --
> 1.8.4.1



\
 
 \ /
  Last update: 2014-01-06 09:41    [W:0.049 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site