lkml.org 
[lkml]   [2014]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] extcon: gpio: Add power resume support
Date
From: Rongjun Ying <rongjun.ying@csr.com>

When system on the suspend state, Some SoC can't get gpio interrupt.
After system resume, need send extcon uevent to userspace.

Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Reviewed-by: Barry Song <Baohua.Song@csr.com>
---
-v3:
'check_on_resume' instead of 'load_sleep_irq' as Chanwoo Choi's proposal.

drivers/extcon/extcon-gpio.c | 20 ++++++++++++++++++++
include/linux/extcon/extcon-gpio.h | 1 +
2 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 7e0dff5..fde52c1 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -40,6 +40,7 @@ struct gpio_extcon_data {
int irq;
struct delayed_work work;
unsigned long debounce_jiffies;
+ bool check_on_resume;
};

static void gpio_extcon_work(struct work_struct *work)
@@ -103,6 +104,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
extcon_data->gpio_active_low = pdata->gpio_active_low;
extcon_data->state_on = pdata->state_on;
extcon_data->state_off = pdata->state_off;
+ extcon_data->check_on_resume = pdata->check_on_resume;
if (pdata->state_on && pdata->state_off)
extcon_data->edev.print_state = extcon_gpio_print_state;
if (pdata->debounce) {
@@ -159,12 +161,30 @@ static int gpio_extcon_remove(struct platform_device *pdev)
return 0;
}

+#ifdef CONFIG_PM_SLEEP
+static int gpio_extcon_resume(struct device *dev)
+{
+ struct gpio_extcon_data *extcon_data;
+
+ extcon_data = dev_get_drvdata(dev);
+ if (extcon_data->check_on_resume)
+ queue_delayed_work(system_power_efficient_wq,
+ &extcon_data->work, extcon_data->debounce_jiffies);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops gpio_extcon_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
+};
+
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.remove = gpio_extcon_remove,
.driver = {
.name = "extcon-gpio",
.owner = THIS_MODULE,
+ .pm = &gpio_extcon_pm_ops,
},
};

diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 4195810..c7f0c3e 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -51,6 +51,7 @@ struct gpio_extcon_platform_data {
/* if NULL, "0" or "1" will be printed */
const char *state_on;
const char *state_off;
+ bool check_on_resume;
};

#endif /* __EXTCON_GPIO_H__ */
--
1.7.5.4


\
 
 \ /
  Last update: 2014-01-07 06:21    [W:0.060 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site