lkml.org 
[lkml]   [2014]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9] gpio: add a driver for Synopsys DesignWare APB GPIO
Hi!

On Thu, Jan 30, 2014 at 01:40:04PM -0600, delicious quinoa wrote:
> On Thu, Dec 12, 2013 at 3:08 AM, Steffen Trumtrar
> <s.trumtrar@pengutronix.de> wrote:
>
> > Second: The interrupt is registered as "GIC 37", which is a real interrupt on
> > the Socfpga. I would expect it to be marked as "GPIO 2xx" (or something in that
> > range). The interrupt from the gpiochip itself isn't registered at all ?!
>
> Hi Stephen,
>
> Did you export the gpio lines and set the edge in sysfs? Because the
> interrupts aren't allocated otherwise.
>
> For instance:
>
> root@socfpga_cyclone5:~# echo 195 > /sys/class/gpio/export
> root@socfpga_cyclone5:~# echo rising > /sys/class/gpio/gpio195/edge
>
> Now I can see a pretty nicely named interrupt in /proc/interrupts:
>
> 256: 0 0 gpio-dwapb 24 gpiolib
>

I didn't try that and I think this behaviour is pretty uncommon.
This should be fixed in the driver. I never wrote a gpiochip-driver,
so I don't know what is missing, but maybe just some functioncall ?!
All other drivers I came across have that entry from probing without
any fiddling.

Thanks,
Steffen

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2014-01-30 22:21    [W:0.080 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site