lkml.org 
[lkml]   [2014]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/8] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
Hi Mark,

>> +static void __init brcmstb_init_early(void)
>> +{
>> + add_preferred_console("ttyS", 0, "115200");
>> +}
>
> Is this really required?

I think I can drop this. It was a holdover from our older kernels.

>> + /*
>> + * set the reset vector to point to the secondary_startup
>> + * routine
>> + */
>> + cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
>> +
>> + flush_cache_all();
>
> Why? What does the new CPU need before its caches are coherent and up?

Absolutely nothing! I should be able to drop this as well.

Regarding the CPU power-down sequence, I'll review it and make sure it follows the
"Processor power domain" sequence in the A15 TRM. For any deviations, I'll double-check
with our H/W designers to ensure there aren't any magic requirements unaccounted for.

Thank you for taking a deep-dive into the code! I'll make the appropriate modifications
per your suggestions.

Regards,
Marc C


On 01/24/2014 02:14 AM, Mark Rutland wrote:
> On Wed, Jan 22, 2014 at 03:30:45AM +0000, Marc Carino wrote:
>> The BCM7xxx series of Broadcom SoCs are used primarily in set-top boxes.
>>
>> This patch adds machine support for the ARM-based Broadcom SoCs.
>>
>> Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
>> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>> arch/arm/configs/multi_v7_defconfig | 1 +
>> arch/arm/mach-bcm/Kconfig | 14 ++
>> arch/arm/mach-bcm/Makefile | 4 +
>> arch/arm/mach-bcm/brcmstb.c | 110 ++++++++++++
>> arch/arm/mach-bcm/brcmstb.h | 38 ++++
>> arch/arm/mach-bcm/headsmp-brcmstb.S | 34 ++++
>> arch/arm/mach-bcm/hotplug-brcmstb.c | 334 +++++++++++++++++++++++++++++++++++
>> 7 files changed, 535 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-bcm/brcmstb.c
>> create mode 100644 arch/arm/mach-bcm/brcmstb.h
>> create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
>> create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
>>
>> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
>> index c1df4e9..7028d11 100644
>> --- a/arch/arm/configs/multi_v7_defconfig
>> +++ b/arch/arm/configs/multi_v7_defconfig
>> @@ -7,6 +7,7 @@ CONFIG_MACH_ARMADA_370=y
>> CONFIG_MACH_ARMADA_XP=y
>> CONFIG_ARCH_BCM=y
>> CONFIG_ARCH_BCM_MOBILE=y
>> +CONFIG_ARCH_BRCMSTB=y
>> CONFIG_GPIO_PCA953X=y
>> CONFIG_ARCH_HIGHBANK=y
>> CONFIG_ARCH_KEYSTONE=y
>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>> index 9fe6d88..2c1ae83 100644
>> --- a/arch/arm/mach-bcm/Kconfig
>> +++ b/arch/arm/mach-bcm/Kconfig
>> @@ -31,6 +31,20 @@ config ARCH_BCM_MOBILE
>> BCM11130, BCM11140, BCM11351, BCM28145 and
>> BCM28155 variants.
>>
>> +config ARCH_BRCMSTB
>> + bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
>> + depends on MMU
>> + select ARM_GIC
>> + select MIGHT_HAVE_PCI
>> + select HAVE_SMP
>> + select HAVE_ARM_ARCH_TIMER
>> + help
>> + Say Y if you intend to run the kernel on a Broadcom ARM-based STB
>> + chipset.
>> +
>> + This enables support for Broadcom ARM-based set-top box chipsets,
>> + including the 7445 family of chips.
>> +
>> endmenu
>>
>> endif
>> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
>> index c2ccd5a..b744a12 100644
>> --- a/arch/arm/mach-bcm/Makefile
>> +++ b/arch/arm/mach-bcm/Makefile
>> @@ -13,3 +13,7 @@
>> obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
>> plus_sec := $(call as-instr,.arch_extension sec,+sec)
>> AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
>> +
>> +obj-$(CONFIG_ARCH_BRCMSTB) := brcmstb.o
>> +obj-$(CONFIG_SMP) += headsmp-brcmstb.o
>> +obj-$(CONFIG_HOTPLUG_CPU) += hotplug-brcmstb.o
>> diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
>> new file mode 100644
>> index 0000000..7a6093d
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/brcmstb.c
>> @@ -0,0 +1,110 @@
>> +/*
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/console.h>
>> +#include <linux/clocksource.h>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/errno.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/printk.h>
>> +#include <linux/smp.h>
>> +
>> +#include <asm/cacheflush.h>
>> +#include <asm/mach-types.h>
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach/map.h>
>> +#include <asm/mach/time.h>
>> +
>> +#include "brcmstb.h"
>> +
>> +/***********************************************************************
>> + * STB CPU (main application processor)
>> + ***********************************************************************/
>> +
>> +static const char *brcmstb_match[] __initconst = {
>> + "brcm,bcm7445",
>> + "brcm,brcmstb",
>> + NULL
>> +};
>> +
>> +static void __init brcmstb_init_early(void)
>> +{
>> + add_preferred_console("ttyS", 0, "115200");
>> +}
>
> Is this really required?
>
>> +
>> +/***********************************************************************
>> + * SMP boot
>> + ***********************************************************************/
>> +
>> +#ifdef CONFIG_SMP
>> +static DEFINE_SPINLOCK(boot_lock);
>> +
>> +static void __cpuinit brcmstb_secondary_init(unsigned int cpu)
>> +{
>> + /*
>> + * Synchronise with the boot thread.
>> + */
>> + spin_lock(&boot_lock);
>> + spin_unlock(&boot_lock);
>> +}
>> +
>> +static int __cpuinit brcmstb_boot_secondary(unsigned int cpu,
>> + struct task_struct *idle)
>> +{
>> + /*
>> + * set synchronisation state between this boot processor
>> + * and the secondary one
>> + */
>> + spin_lock(&boot_lock);
>> +
>> + /* Bring up power to the core if necessary */
>> + if (brcmstb_cpu_get_power_state(cpu) == 0)
>> + brcmstb_cpu_power_on(cpu);
>> +
>> + brcmstb_cpu_boot(cpu);
>> +
>> + /*
>> + * now the secondary core is starting up let it run its
>> + * calibrations, then wait for it to finish
>> + */
>> + spin_unlock(&boot_lock);
>> +
>> + return 0;
>> +}
>> +
>> +struct smp_operations brcmstb_smp_ops __initdata = {
>> + .smp_prepare_cpus = brcmstb_cpu_ctrl_setup,
>> + .smp_secondary_init = brcmstb_secondary_init,
>> + .smp_boot_secondary = brcmstb_boot_secondary,
>> +#ifdef CONFIG_HOTPLUG_CPU
>> + .cpu_kill = brcmstb_cpu_kill,
>> + .cpu_die = brcmstb_cpu_die,
>> +#endif
>> +};
>> +#endif
>> +
>> +DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
>> + .dt_compat = brcmstb_match,
>> +#ifdef CONFIG_SMP
>> + .smp = smp_ops(brcmstb_smp_ops),
>> +#endif
>> + .init_early = brcmstb_init_early,
>> +MACHINE_END
>> diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h
>> new file mode 100644
>> index 0000000..e49bde6
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/brcmstb.h
>> @@ -0,0 +1,38 @@
>> +/*
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __BRCMSTB_H__
>> +#define __BRCMSTB_H__
>> +
>> +#if !defined(__ASSEMBLY__)
>> +#include <linux/smp.h>
>> +#endif
>> +
>> +#if !defined(__ASSEMBLY__)
>> +extern void brcmstb_secondary_startup(void);
>> +extern void brcmstb_cpu_boot(unsigned int cpu);
>> +extern void brcmstb_cpu_power_on(unsigned int cpu);
>> +extern int brcmstb_cpu_get_power_state(unsigned int cpu);
>> +extern struct smp_operations brcmstb_smp_ops;
>> +#if defined(CONFIG_HOTPLUG_CPU)
>> +extern void brcmstb_cpu_die(unsigned int cpu);
>> +extern int brcmstb_cpu_kill(unsigned int cpu);
>> +void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus);
>> +#else
>> +static inline void brcmstb_cpu_die(unsigned int cpu) {}
>> +static inline int brcmstb_cpu_kill(unsigned int cpu) {}
>> +static inline void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) {}
>> +#endif
>> +#endif
>> +
>> +#endif /* __BRCMSTB_H__ */
>> diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S
>> new file mode 100644
>> index 0000000..57ec438
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/headsmp-brcmstb.S
>> @@ -0,0 +1,34 @@
>> +/*
>> + * SMP boot code for secondary CPUs
>> + * Based on arch/arm/mach-tegra/headsmp.S
>> + *
>> + * Copyright (C) 2010 NVIDIA, Inc.
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <asm/assembler.h>
>> +#include <linux/linkage.h>
>> +#include <linux/init.h>
>> +
>> + .section ".text.head", "ax"
>> + __CPUINIT
>
> __CPUINIT is either going or gone by now. This should disappear.
>
>> +
>> +ENTRY(brcmstb_secondary_startup)
>> + /*
>> + * Ensure CPU is in a sane state by disabling all IRQs and switching
>> + * into SVC mode.
>> + */
>> + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
>> +
>> + bl v7_invalidate_l1
>> + b secondary_startup
>> +ENDPROC(brcmstb_secondary_startup)
>> diff --git a/arch/arm/mach-bcm/hotplug-brcmstb.c b/arch/arm/mach-bcm/hotplug-brcmstb.c
>> new file mode 100644
>> index 0000000..ff4a732
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/hotplug-brcmstb.c
>> @@ -0,0 +1,334 @@
>> +/*
>> + * Broadcom STB CPU hotplug support for ARM
>> + *
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/errno.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/printk.h>
>> +#include <linux/regmap.h>
>> +#include <linux/smp.h>
>> +#include <linux/mfd/syscon.h>
>> +
>> +#include <asm/cacheflush.h>
>> +#include <asm/mach-types.h>
>> +
>> +#include "brcmstb.h"
>> +
>> +enum {
>> + ZONE_MAN_CLKEN_MASK = BIT(0),
>> + ZONE_MAN_RESET_CNTL_MASK = BIT(1),
>> + ZONE_MAN_MEM_PWR_MASK = BIT(4),
>> + ZONE_RESERVED_1_MASK = BIT(5),
>> + ZONE_MAN_ISO_CNTL_MASK = BIT(6),
>> + ZONE_MANUAL_CONTROL_MASK = BIT(7),
>> + ZONE_PWR_DN_REQ_MASK = BIT(9),
>> + ZONE_PWR_UP_REQ_MASK = BIT(10),
>> + ZONE_BLK_RST_ASSERT_MASK = BIT(10),
>> + ZONE_PWR_OFF_STATE_MASK = BIT(26),
>> + ZONE_PWR_ON_STATE_MASK = BIT(26),
>> + ZONE_DPG_PWR_STATE_MASK = BIT(28),
>> + ZONE_MEM_PWR_STATE_MASK = BIT(29),
>> + ZONE_RESET_STATE_MASK = BIT(31),
>> +};
>> +
>> +static void __iomem *cpubiuctrl_block;
>> +static void __iomem *hif_cont_block;
>> +static u32 cpu0_pwr_zone_ctrl_reg;
>> +static u32 cpu_rst_cfg_reg;
>> +static u32 hif_cont_reg;
>> +DEFINE_PER_CPU(int, per_cpu_sw_state);
>> +
>> +static void __iomem *pwr_ctrl_get_base(unsigned int cpu)
>> +{
>> + void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
>> + base += (cpu * 4);
>
> CPU isn't guaranteed to be the physical CPU ID (MPIDR.Aff*). While it
> almost certainly will be, we can't guarantee it in the face of a kexec,
> for example.
>
> You can use cpu_logical_map(cpu) to get the physical ID.
>
>> + return base;
>> +}
>> +
>> +static u32 pwr_ctrl_rd(unsigned int cpu)
>> +{
>> + void __iomem *base = pwr_ctrl_get_base(cpu);
>> + return readl_relaxed(base);
>> +}
>> +
>> +static void pwr_ctrl_wr(unsigned int cpu, u32 val)
>> +{
>> + void __iomem *base = pwr_ctrl_get_base(cpu);
>> + writel(val, base);
>> +}
>> +
>> +static void cpu_rst_cfg_set(int cpu, int set)
>> +{
>> + u32 val;
>> + val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
>> + if (set)
>> + val |= BIT(cpu);
>> + else
>> + val &= ~BIT(cpu);
>
> Likewise here.
>
>> + writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
>> +}
>> +
>> +static void cpu_set_boot_addr(int cpu, unsigned long boot_addr)
>> +{
>> + const int reg_ofs = cpu * 8;
>
> And here.
>
>> + writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
>> + writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
>> +}
>> +
>> +void brcmstb_cpu_boot(unsigned int cpu)
>> +{
>> + pr_info("SMP: Booting CPU%d...\n", cpu);
>> +
>> + /*
>> + * set the reset vector to point to the secondary_startup
>> + * routine
>> + */
>> + cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
>> +
>> + flush_cache_all();
>
> Why? What does the new CPU need before its caches are coherent and up?
>
>> +
>> + /* unhalt the cpu */
>> + cpu_rst_cfg_set(cpu, 0);
>> +}
>> +
>> +void brcmstb_cpu_power_on(unsigned int cpu)
>> +{
>> + /*
>> + * The secondary cores power was cut, so we must go through
>> + * power-on initialization.
>> + */
>> + u32 tmp;
>> +
>> + pr_info("SMP: Powering up CPU%d...\n", cpu);
>> +
>> + /* Request zone power up */
>> + pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
>> +
>> + /* Wait for the power up FSM to complete */
>> + do {
>> + tmp = pwr_ctrl_rd(cpu);
>> + } while (!(tmp & ZONE_PWR_ON_STATE_MASK));
>> +
>> + per_cpu(per_cpu_sw_state, cpu) = 1;
>> +}
>> +
>> +int brcmstb_cpu_get_power_state(unsigned int cpu)
>> +{
>> + int tmp = pwr_ctrl_rd(cpu);
>> + return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
>> +}
>> +
>> +void __ref brcmstb_cpu_die(unsigned int cpu)
>> +{
>> + /* Derived from misc_bpcm_arm.c */
>> +
>> + /* Clear SCTLR.C bit */
>> + __asm__(
>> + "mrc p15, 0, r0, c1, c0, 0\n"
>> + "bic r0, r0, #(1 << 2)\n"
>> + "mcr p15, 0, r0, c1, c0, 0\n"
>> + : /* no output */
>> + : /* no input */
>> + : "r0" /* clobber r0 */
>> + );
>
> This is odd. Why not allow GCC to allocate the register?
>
>> +
>> + /*
>> + * Instruction barrier to ensure cache is really disabled before
>> + * cleaning/invalidating the caches
>> + */
>> + isb();
>
> I think you could use:
>
> set_cr(get_cr() & ~CR_C))
>
> Which would do all of the above (including the isb), and will get GCC to
> allocate the register.
>
>> +
>> + flush_cache_all();
>> +
>> + /* Invalidate all instruction caches to PoU (ICIALLU) */
>> + /* Data sync. barrier to ensure caches have emptied out */
>> + __asm__("mcr p15, 0, r0, c7, c5, 0\n" : : : "r0");
>> + dsb();
>
> Why do you need to invalidate the I-cache?
>
>> +
>> + /*
>> + * Clear ACTLR.SMP bit to prevent broadcast TLB messages from reaching
>> + * this core
>> + */
>> + __asm__(
>> + "mrc p15, 0, r0, c1, c0, 1\n"
>> + "bic r0, r0, #(1 << 6)\n"
>> + "mcr p15, 0, r0, c1, c0, 1\n"
>> + : /* no output */
>> + : /* no input */
>> + : "r0" /* clobber r0 */
>> + );
>
> Surely you can use an output operand to get GCC to allocate the register
> for you?
>
>> +
>> + /* Disable all IRQs for this CPU */
>> + arch_local_irq_disable();
>> +
>> + per_cpu(per_cpu_sw_state, cpu) = 0;
>
> Your caches are off at this point, so this could be going straight to
> memory. Yet readers of this value aren't cleaning their caches before
> reading this, so they could hit a stale cached copy.
>
>> +
>> + /*
>> + * Final full barrier to ensure everything before this instruction has
>> + * quiesced.
>> + */
>> + isb();
>> + dsb();
>> +
>> + /* Sit and wait to die */
>> + wfi();
>> +
>> + /* We should never get here... */
>> + nop();
>
> Why the nop first?
>
>> + panic("Spurious interrupt on CPU %d received!\n", cpu);
>> +}
>> +
>> +int brcmstb_cpu_kill(unsigned int cpu)
>> +{
>> + u32 tmp;
>> +
>> + pr_info("SMP: Powering down CPU%d...\n", cpu);
>> +
>> + while (per_cpu(per_cpu_sw_state, cpu))
>> + ;
>
> As this was written to with caches disabled, the cached copy of the
> value (which this is reading) could be stale. Surely you need to
> clean+invalidate the line for this value each time you read it to give
> it a chance to update?
>
>> +
>> + /* Program zone reset */
>> + pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
>> + ZONE_PWR_DN_REQ_MASK);
>> +
>> + /* Verify zone reset */
>> + tmp = pwr_ctrl_rd(cpu);
>> + if (!(tmp & ZONE_RESET_STATE_MASK))
>> + pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
>> + __func__, cpu);
>> +
>> + /* Wait for power down */
>> + do {
>> + tmp = pwr_ctrl_rd(cpu);
>> + } while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
>> +
>> + /* Settle-time from Broadcom-internal DVT reference code */
>> + udelay(7);
>> +
>> + /* Assert reset on the CPU */
>> + cpu_rst_cfg_set(cpu, 1);
>> +
>> + return 1;
>> +}
>> +
>> +static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
>> +{
>> + int rc = 0;
>> + char *name;
>> + int index;
>> + struct device_node *syscon_np = NULL;
>> +
>> + name = "syscon-cpu";
>> +
>> + syscon_np = of_parse_phandle(np, name, 0);
>> + if (!syscon_np) {
>> + pr_err("can't find phandle %s\n", name);
>> + rc = -EINVAL;
>> + goto cleanup;
>> + }
>> +
>> + cpubiuctrl_block = of_iomap(syscon_np, 0);
>> + if (!cpubiuctrl_block) {
>> + pr_err("iomap failed for cpubiuctrl_block\n");
>> + rc = -EINVAL;
>> + goto cleanup;
>> + }
>> +
>> + index = 1;
>> + rc = of_property_read_u32_index(np, name, index,
>> + &cpu0_pwr_zone_ctrl_reg);
>
> The index variable seems rather pointless. Why not just use the value
> in-place?
>
>> + if (rc) {
>> + pr_err("failed to read %d from %s property (%d)\n", index, name,
>> + rc);
>
> It might be better to state _what_ you're looking for (what does the
> value represent?).
>
>> + rc = -EINVAL;
>> + goto cleanup;
>> + }
>> +
>> + index = 2;
>> + rc = of_property_read_u32_index(np, name, index, &cpu_rst_cfg_reg);
>
> Likewise for all of the above.
>
> Thanks,
> Mark.
>



\
 
 \ /
  Last update: 2014-01-24 22:41    [W:0.138 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site