lkml.org 
[lkml]   [2014]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] usb: musb: musb_host: Enable ISOCH IN handling for AM335x host
Hello.

On 24-01-2014 18:14, George Cherian wrote:

> Enable the isochrounous IN handling for AM335x HOST.
> Reprogram CPPI to receive consecutive ISOCH frames in the same URB.

Sigh, I knew CPPI ISO path was broken for years but didn't have time to
fix it. :-(

> Signed-off-by: George Cherian <george.cherian@ti.com>
> ---
> drivers/usb/musb/musb_host.c | 29 ++++++++++++++++++++++++++---
> 1 file changed, 26 insertions(+), 3 deletions(-)

> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index ed45572..5b6482c 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -1689,9 +1689,11 @@ void musb_host_rx(struct musb *musb, u8 epnum)
> | MUSB_RXCSR_H_AUTOREQ
> | MUSB_RXCSR_AUTOCLEAR
> | MUSB_RXCSR_RXPKTRDY);
> +

Not needed.

> musb_writew(hw_ep->regs, MUSB_RXCSR, val);
>
> -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
> +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \
> + defined(CONFIG_USB_TI_CPPI41_DMA)

The DaVinci CPPI 3.0 should probably also be included here...

> if (usb_pipeisoc(pipe)) {
> struct usb_iso_packet_descriptor *d;
>
> @@ -1706,8 +1708,28 @@ void musb_host_rx(struct musb *musb, u8 epnum)
>
> if (++qh->iso_idx >= urb->number_of_packets)
> done = true;
> - else
> + else {

If you're making the *else* arm use {}, you should make all the other arms
of *if* statement also have them -- see Documentation/CodingStyle.

WBR, Sergei



\
 
 \ /
  Last update: 2014-01-24 19:01    [W:0.064 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site