Messages in this thread | | | Date | Wed, 22 Jan 2014 19:25:42 -0800 | Subject | Re: Internal error: Oops: 17 [#1] ARM | From | John Tobias <> |
| |
Hi Fabio,
Attached are the two patch files that I applied in the 3.13 released so that the kernel will detect my eMMC in DDR50. (let me correct my previous email, I was mentioning SDR50 but it should be DDR50). eMMC info:
clock: 52000000 Hz actual clock: 49500000 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 3 (8 bits) timing spec: 1 (mmc high-speed) signal voltage: 0 (3.30 V)
I reboot my device often and it shows during the reboot.
Regards,
john
On Wed, Jan 22, 2014 at 6:28 PM, Fabio Estevam <festevam@gmail.com> wrote: > On Wed, Jan 22, 2014 at 9:49 PM, John Tobias <john.tobias.ph@gmail.com> wrote: >> Hello all, >> >> Just to confirm that the error I posted previously exist in 3.13 >> released. Just be noted that some patches related to eMMC/sdhci has >> been applied in order to boot the 3.13 on my board. >> Addition to that, I was getting additional errors (please see below): >> - It happened during the reboot. >> >> Cc'ng Dong Aisheng. > > What are the steps to reproduce this? Which SoC are you using? > > Regards, > > Fabio Estevam [unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream] | |