lkml.org 
[lkml]   [2014]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Kconfig errors
On Wed, Jan 22, 2014 at 05:54:29PM +0530, Prabhakar Lad wrote:
> Hi Russell,
>
> On Fri, Jan 17, 2014 at 1:07 PM, Prabhakar Lad
> <prabhakar.csengg@gmail.com> wrote:
> > Hi,
> >
> > On Linux-next branch I see following errors for davinci_all_defconfig
> > & da8xx_omapl_defconfig configs,
> >
> > arch/arm/Kconfig:1966:error: recursive dependency detected!
> > arch/arm/Kconfig:1966: symbol ZBOOT_ROM depends on AUTO_ZRELADDR
> > arch/arm/Kconfig:2154: symbol AUTO_ZRELADDR is selected by ZBOOT_ROM
> > #
> > # configuration written to .config
> > #
> >
> I am seeing this errors on linux-next, with your recent patch,
> "[PATCH] Fix select-induced Kconfig warning for ZBOOT_ROM"
> and strangely I see that AUTO_ZRELADDR doesnt select ZBOOT_ROM
> but still an error.
>
> Note: For the davinci configs CONFIG_AUTO_ZRELADDR is not set and
> CONFIG_ZBOOT_ROM_TEXT=0x0, CONFIG_ZBOOT_ROM_BSS=0x0

I've killed off the "select AUTO_ZRELADDR if !ZBOOT_ROM" in the IMX
Kconfig now, so when linux-next picks up my tree, that should be gone.

--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".


\
 
 \ /
  Last update: 2014-01-22 14:01    [W:0.042 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site