lkml.org 
[lkml]   [2014]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] imx27: pinctrl: fix wrong offset to ICONFB
Hi Markus,

On Tuesday, January 21, 2014 06:24 PM, Markus Pargmann wrote:
> Hi,
>
> On Thu, Jan 16, 2014 at 09:18:23AM +0800, Chris Ruehl wrote:
>> The offset to ICONFB was incorrect, this patch set the correct value 0x14.
>> dev_dbg in function imx1_write_2bit print the wrong address and had been
>> moved after address calculation.
>>
>> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
>
> Reviewed-by: Markus Pargmann <mpa@pengutronix.de>
>
> Perhaps this should go to the stable tree too for 3.13 and 3.14?

Yes of cause, and I have one more, the offset in

@@ -139,7 +139,7 @@ static int imx1_read_2bit(struct imx1_pinctrl *ipctl,
unsigned int pin_id,
u32 reg_offset)
{
void __iomem *reg = imx1_mem(ipctl, pin_id) + reg_offset;
- int offset = pin_id % 16;
+ int offset = (pin_id % 16) * 2;

/* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16)

should fixed, otherwise the printout of
/sys/kernel/debug/pinctrl/10015000.iomuxc/pins show prints the wrong confo /
iconfa / iconfb

I prepare a patch.

With kind regards,
Chris

>
> Regards,
>
> Markus
>
>> ---
>> drivers/pinctrl/pinctrl-imx1-core.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/pinctrl/pinctrl-imx1-core.c b/drivers/pinctrl/pinctrl-imx1-core.c
>> index f77914a..8dfc3dc 100644
>> --- a/drivers/pinctrl/pinctrl-imx1-core.c
>> +++ b/drivers/pinctrl/pinctrl-imx1-core.c
>> @@ -45,7 +45,7 @@ struct imx1_pinctrl {
>> #define MX1_DDIR 0x00
>> #define MX1_OCR 0x04
>> #define MX1_ICONFA 0x0c
>> -#define MX1_ICONFB 0x10
>> +#define MX1_ICONFB 0x14
>> #define MX1_GIUS 0x20
>> #define MX1_GPR 0x38
>> #define MX1_PUEN 0x40
>> @@ -97,13 +97,13 @@ static void imx1_write_2bit(struct imx1_pinctrl *ipctl, unsigned int pin_id,
>> u32 old_val;
>> u32 new_val;
>>
>> - dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
>> - reg, offset, value);
>> -
>> /* Use the next register if the pin's port pin number is >=16 */
>> if (pin_id % 32 >= 16)
>> reg += 0x04;
>>
>> + dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
>> + reg, offset, value);
>> +
>> /* Get current state of pins */
>> old_val = readl(reg);
>> old_val &= mask;
>> --
>> 1.7.10.4
>>
>>
>

--
GTSYS Limited RFID Technology
A01 24/F Gold King Industrial Bld
35-41 Tai Lin Pai Road, Kwai Chung, Hong Kong
Fax (852) 8167 4060 - Tel (852) 3598 9488

Disclaimer: http://www.gtsys.com.hk/email/classified.html


\
 
 \ /
  Last update: 2014-01-22 03:41    [W:0.146 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site