lkml.org 
[lkml]   [2014]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst
On Tue, Dec 31, 2013 at 12:40:16PM -0800, walt wrote:
> On 12/18/2013 01:11 PM, Greg Kroah-Hartman wrote:
> > 3.12-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: David Laight <David.Laight@ACULAB.COM>
> >
> > commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e upstream.
> >
> > Section 4.11.7.1 of rev 1.0 of the xhci specification states that a link TRB
> > can only occur at a boundary between underlying USB frames (512 bytes for
> > high speed devices).
> >
> > If this isn't done the USB frames aren't formatted correctly and, for example,
> > the USB3 ethernet ax88179_178a card will stop sending...
>
>
> Unfortunately this patch causes a regression when copying large files to my
> outboard USB3 drive. (Nothing at all to do with networking.)
>
> When I try to copy a large (20GB) file to the USB3 drive, the copy dies after
> about 7GB, the ext4 journal aborts and the drive is remounted read-only.
>
> This bug is 100% reproducible (always pretty close to 7GB) and reverting this
> patch completely fixes the problem.

Ok, I had feared that would be a consequence of this patch. I think the
problem is that the usb-storage driver submitted an URB with more
scatter-gather entries than would fit on the ring segment, the xHCI
driver rejected the URB with -ENOMEM, and the SCSI core eventually gave
up on the SCSI command.

Do you have CONFIG_USB_DEBUG turned on for 3.13? If so, you should see
dmesg output from this statement shortly before your drive fails:

if (num_trbs >= TRBS_PER_SEGMENT) {
xhci_err(xhci, "Too many fragments %d, max %d\n",
num_trbs, TRBS_PER_SEGMENT - 1);
return -ENOMEM;
}

> (Note to Sarah: I recently emailed you about this problem, and I *wrongly*
> said that reverting the patch doesn't help. That was a mistake, sorry.)
>
> I'm happy to try any debugging suggestions/tricks.

Unfortunately a real fix for this is going to take a bit. I have a
couple different solutions to the bug the patch solved, but they're much
more invasive than the original patch and will take a couple weeks to
implement and thoroughly test.

If David's patch is just reverted, USB ethernet on 3.12 and later breaks
under xHCI. The networking folks added scatter-gather support in 3.12.
Those patches could be reverted, but I suspect David Miller will not be
happy with that solution, since the real problem is the xHCI driver
itself, and EHCI scatter-gather works fine.

I think the short term solution is to simply turn off scatter-gather all
together under xHCI until this gets fixed. It could mean a big
performance hit for USB storage devices, but that means we get correct
behavior for both USB ethernet and USB storage.

> BTW, please tell me if I've cc'd too many people.

Nope, you're fine. I've Cc'ed the USB and SCSI mailing lists as well.

Sarah Sharp


\
 
 \ /
  Last update: 2014-01-02 20:41    [W:0.544 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site