lkml.org 
[lkml]   [2014]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH-v2 12/17] target/file: Add DIF protection init/format support
On 1/19/2014 4:44 AM, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
>
> This patch adds support for DIF protection init/format support into
> the FILEIO backend.
>
> It involves using a seperate $FILE.protection for storing PI that is
> opened via fd_init_prot() using the common pi_prot_type attribute.
> The actual formatting of the protection is done via fd_format_prot()
> using the common pi_prot_format attribute, that will populate the
> initial PI data based upon the currently configured pi_prot_type.
>
> Based on original FILEIO code from Sagi.

Nice! see comments below...

> v1 changes:
> - Fix sparse warnings in fd_init_format_buf (Fengguang)
>
> Cc: Martin K. Petersen <martin.petersen@oracle.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Hannes Reinecke <hare@suse.de>
> Cc: Sagi Grimberg <sagig@mellanox.com>
> Cc: Or Gerlitz <ogerlitz@mellanox.com>
> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
> ---
> drivers/target/target_core_file.c | 137 +++++++++++++++++++++++++++++++++++++
> drivers/target/target_core_file.h | 4 ++
> 2 files changed, 141 insertions(+)
>
> diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
> index 0e34cda..119d519 100644
> --- a/drivers/target/target_core_file.c
> +++ b/drivers/target/target_core_file.c
> @@ -700,6 +700,140 @@ static sector_t fd_get_blocks(struct se_device *dev)
> dev->dev_attrib.block_size);
> }
>
> +static int fd_init_prot(struct se_device *dev)
> +{
> + struct fd_dev *fd_dev = FD_DEV(dev);
> + struct file *prot_file, *file = fd_dev->fd_file;
> + struct inode *inode;
> + int ret, flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC;
> + char buf[FD_MAX_DEV_PROT_NAME];
> +
> + if (!file) {
> + pr_err("Unable to locate fd_dev->fd_file\n");
> + return -ENODEV;
> + }
> +
> + inode = file->f_mapping->host;
> + if (S_ISBLK(inode->i_mode)) {
> + pr_err("FILEIO Protection emulation only supported on"
> + " !S_ISBLK\n");
> + return -ENOSYS;
> + }
> +
> + if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE)
> + flags &= ~O_DSYNC;
> +
> + snprintf(buf, FD_MAX_DEV_PROT_NAME, "%s.protection",
> + fd_dev->fd_dev_name);
> +
> + prot_file = filp_open(buf, flags, 0600);
> + if (IS_ERR(prot_file)) {
> + pr_err("filp_open(%s) failed\n", buf);
> + ret = PTR_ERR(prot_file);
> + return ret;
> + }
> + fd_dev->fd_prot_file = prot_file;
> +
> + return 0;
> +}
> +
> +static void fd_init_format_buf(struct se_device *dev, unsigned char *buf,
> + u32 unit_size, u32 *ref_tag, u16 app_tag,
> + bool inc_reftag)
> +{
> + unsigned char *p = buf;
> + int i;
> +
> + for (i = 0; i < unit_size; i += dev->prot_length) {
> + *((u16 *)&p[0]) = 0xffff;
> + *((__be16 *)&p[2]) = cpu_to_be16(app_tag);
> + *((__be32 *)&p[4]) = cpu_to_be32(*ref_tag);
> +
> + if (inc_reftag)
> + (*ref_tag)++;
> +
> + p += dev->prot_length;
> + }
> +}
> +
> +static int fd_format_prot(struct se_device *dev)
> +{
> + struct fd_dev *fd_dev = FD_DEV(dev);
> + struct file *prot_fd = fd_dev->fd_prot_file;
> + sector_t prot_length, prot;
> + unsigned char *buf;
> + loff_t pos = 0;
> + u32 ref_tag = 0;
> + int unit_size = FDBD_FORMAT_UNIT_SIZE * dev->dev_attrib.block_size;
> + int rc, ret = 0, size, len;
> + bool inc_reftag = false;
> +
> + if (!dev->dev_attrib.pi_prot_type) {
> + pr_err("Unable to format_prot while pi_prot_type == 0\n");
> + return -ENODEV;
> + }
> + if (!prot_fd) {
> + pr_err("Unable to locate fd_dev->fd_prot_file\n");
> + return -ENODEV;
> + }
> +
> + switch (dev->dev_attrib.pi_prot_type) {
redundant - see below.
> + case TARGET_DIF_TYPE3_PROT:
> + ref_tag = 0xffffffff;
> + break;
> + case TARGET_DIF_TYPE2_PROT:
> + case TARGET_DIF_TYPE1_PROT:
> + inc_reftag = true;
> + break;
> + default:
> + break;
> + }
> +
> + buf = vzalloc(unit_size);
> + if (!buf) {
> + pr_err("Unable to allocate FILEIO prot buf\n");
> + return -ENOMEM;
> + }
> +
> + prot_length = (dev->transport->get_blocks(dev) + 1) * dev->prot_length;
> + size = prot_length;
> +
> + pr_debug("Using FILEIO prot_length: %llu\n",
> + (unsigned long long)prot_length);
> +
> + for (prot = 0; prot < prot_length; prot += unit_size) {
> +
> + fd_init_format_buf(dev, buf, unit_size, &ref_tag, 0xffff,
> + inc_reftag);

I didn't send you my latest patches (my fault...).T10-PI format should
only place
escape values throughout the protection file (fill it with 0xff). so I
guess in this case
fd_init_formast_buf() boils down to memset(buf, 0xff, unit_size) once
before the loop
and just loop until prot_length writing buf, no need to address
apptag/reftag...

> +
> + len = min(unit_size, size);
> +
> + rc = kernel_write(prot_fd, buf, len, pos);
> + if (rc != len) {
> + pr_err("vfs_write to prot file failed: %d\n", rc);
> + ret = -ENODEV;
> + goto out;
> + }
> + pos += len;
> + size -= len;
> + }
> +
> +out:
> + vfree(buf);
> + return ret;
> +}
> +
> +static void fd_free_prot(struct se_device *dev)
> +{
> + struct fd_dev *fd_dev = FD_DEV(dev);
> +
> + if (!fd_dev->fd_prot_file)
> + return;
> +
> + filp_close(fd_dev->fd_prot_file, NULL);
> + fd_dev->fd_prot_file = NULL;
> +}
> +
> static struct sbc_ops fd_sbc_ops = {
> .execute_rw = fd_execute_rw,
> .execute_sync_cache = fd_execute_sync_cache,
> @@ -730,6 +864,9 @@ static struct se_subsystem_api fileio_template = {
> .show_configfs_dev_params = fd_show_configfs_dev_params,
> .get_device_type = sbc_get_device_type,
> .get_blocks = fd_get_blocks,
> + .init_prot = fd_init_prot,
> + .format_prot = fd_format_prot,
> + .free_prot = fd_free_prot,
> };
>
> static int __init fileio_module_init(void)
> diff --git a/drivers/target/target_core_file.h b/drivers/target/target_core_file.h
> index 37ffc5b..583691e 100644
> --- a/drivers/target/target_core_file.h
> +++ b/drivers/target/target_core_file.h
> @@ -4,6 +4,7 @@
> #define FD_VERSION "4.0"
>
> #define FD_MAX_DEV_NAME 256
> +#define FD_MAX_DEV_PROT_NAME FD_MAX_DEV_NAME + 16
> #define FD_DEVICE_QUEUE_DEPTH 32
> #define FD_MAX_DEVICE_QUEUE_DEPTH 128
> #define FD_BLOCKSIZE 512
> @@ -15,6 +16,8 @@
> #define FBDF_HAS_PATH 0x01
> #define FBDF_HAS_SIZE 0x02
> #define FDBD_HAS_BUFFERED_IO_WCE 0x04
> +#define FDBD_FORMAT_UNIT_SIZE 2048
> +
>
> struct fd_dev {
> struct se_device dev;
> @@ -29,6 +32,7 @@ struct fd_dev {
> u32 fd_block_size;
> unsigned long long fd_dev_size;
> struct file *fd_file;
> + struct file *fd_prot_file;
> /* FILEIO HBA device is connected to */
> struct fd_host *fd_host;
> } ____cacheline_aligned;



\
 
 \ /
  Last update: 2014-01-19 14:01    [W:0.256 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site