lkml.org 
[lkml]   [2014]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC 5/6] net: rfkill: gpio: add clock-frequency device tree property
Date
Some devices, such as Broadcom Bluetooth devices, require a specific
clock rate for the clock tied to the rfkill device. Add clock-frequency
property so we can specify this from the device tree.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt | 2 ++
net/rfkill/rfkill-gpio.c | 4 ++++
2 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt b/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
index 8a07ea4..8b8db0a 100644
--- a/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
+++ b/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
@@ -13,6 +13,7 @@ NAME_reset-gpios, or both, must be defined.

Optional properties:
- clocks : phandle to clock to enable/disable
+- clock-frequency : clock rate to set for the given clock

Example:

@@ -23,4 +24,5 @@ Example:
bluetooth_shutdown-gpios = <0>, <&pio 7 18 0>;
bluetooth_reset-gpios = <&pio 7 24 0>;
clocks = <&clk_out_a>;
+ clock-frequency = <32678>;
};
diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
index 48381a8..3092681 100644
--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -40,6 +40,7 @@ struct rfkill_gpio_data {
char *reset_name;
char *shutdown_name;
struct clk *clk;
+ int clk_frequency;

bool clk_enabled;
};
@@ -92,6 +93,7 @@ static int rfkill_gpio_dt_probe(struct device *dev,
rfkill->name = np->name;
of_property_read_string(np, "rfkill-name", &rfkill->name);
of_property_read_u32(np, "rfkill-type", &rfkill->type);
+ of_property_read_u32(np, "clock-frequency", &rfkill->clk_frequency);

return 0;
}
@@ -138,6 +140,8 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
snprintf(rfkill->shutdown_name, len + 10, "%s_shutdown", rfkill->name);

rfkill->clk = devm_clk_get(&pdev->dev, clk_name);
+ if (!IS_ERR(rfkill->clk) && rfkill->clk_frequency > 0)
+ clk_set_rate(rfkill->clk, rfkill->clk_frequency);

gpio = devm_gpiod_get_index(&pdev->dev, rfkill->reset_name, 0);
if (!IS_ERR(gpio)) {
--
1.8.5.2


\
 
 \ /
  Last update: 2014-01-17 08:21    [W:0.180 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site