lkml.org 
[lkml]   [2014]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8] Staging: comedi: convert while loop to timeout in ni_mio_common.c
Date
This patch for ni_mio_common.c changes out a while loop for a timeout,
which is preferred.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
---

Okay, back to v2, basically. I fixed the checkpatch warning from v2,
and added the error checking that was from v3, but otherwise it is the
same. Of note, I have used a udelay of 1 here (Greg had suggested to
use 10, but Ian prefers 1 so I have gone with that, and I assume that
cpu_relax is no longer an option.).

2: Changed from simple clean-up to swapping a timeout in for a while loop.

3: Removed extra counter variable, and added error checking.

4: No longer using counter variable, using jiffies instead.

5: udelay for 10u, instead of 1u.

6: Scrap udelay entirely, in favor of cpu_relax. Include asm/processor.h
in order to use cpu_relax.

7: Fix typo (msec vs msecs).

8: Revert back to v2, with some small changes (see above).

drivers/staging/comedi/drivers/ni_mio_common.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 457b884..10c27cb 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -687,12 +687,22 @@ static void ni_clear_ai_fifo(struct comedi_device *dev)
{
const struct ni_board_struct *board = comedi_board(dev);
struct ni_private *devpriv = dev->private;
+ static const int timeout = 10000;
+ int i;

if (board->reg_type == ni_reg_6143) {
/* Flush the 6143 data FIFO */
ni_writel(0x10, AIFIFO_Control_6143); /* Flush fifo */
ni_writel(0x00, AIFIFO_Control_6143); /* Flush fifo */
- while (ni_readl(AIFIFO_Status_6143) & 0x10) ; /* Wait for complete */
+ /* Wait for complete */
+ for (i = 0; i < timeout; i++) {
+ if (!(ni_readl(AIFIFO_Status_6143) & 0x10))
+ break;
+ udelay(1);
+ }
+ if (i == timeout) {
+ comedi_error(dev, "FIFO flush timeout.");
+ }
} else {
devpriv->stc_writew(dev, 1, ADC_FIFO_Clear);
if (board->reg_type == ni_reg_625x) {
--
1.8.4.2


\
 
 \ /
  Last update: 2014-01-16 20:01    [W:0.141 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site