lkml.org 
[lkml]   [2014]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: In "pci_fixup_video" check if this is or should be the primary video devi

Wednesday, January 15, 2014, 10:50:09 PM, you wrote:

> On Wed, Jan 15, 2014 at 12:36 PM, Sander Eikelenboom
> <linux@eikelenboom.it> wrote:
>> ...
>> And that's just what my patch does ..
>>
>> + if (!vga_default_device() || pdev == vga_default_device()) {
>>
>> If we don't know the vga_default_device ... because we don't have that knowlegde
>> or
>> if this is actually the vga_default_device ... because we do have that knowledge ..
>>
>> and only then .. run the fixup code and set this device as the vga_default_device
>>
>>
>> So this change actually makes the code adhere to the comment already above it .. saying it should only be applied to the vga_default_device aka
>> boot video device.
>>
>> Also added Bjorn and linux-pci to the CC .. should have done that right away ..
>> sorry for that.

> Can you resend your patch to linux-pci? I don't think it made it there.

> Bjorn


Sure .. also attached for the case it gets mangled ..

Date: Sun, 12 Jan 2014 04:49:44 +0100
Subject: [PATCH] In "pci_fixup_video" check if this is or should be the
primary video device to prevent setting the
IORESOURCE_ROM_SHADOW flag on a secondary VGA card
To: Dave Airlie <airlied@redhat.com>,
Eiichiro Oiwa <eiichiro.oiwa.nm@hitachi.com>,
Greg Kroah-Hartman <gregkh@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>

Setting the IORESOURCE_ROM_SHADOW flag on a secondary VGA card prevents if from
reading it's own rom. It will get the content of the shadowrom at C000 instead,
which is of the primary VGA card and the driver of the secondary card will bail
out.

Fix this by checking if this is or should be the primary video device before
applying the fix and let the comment reflect this.

Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
---
arch/x86/pci/fixup.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index b046e07..525e49a 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -314,9 +314,9 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_r
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
+ * See pci_map_rom() for use of this flag. Before we mark the device
+ * with IORESOURCE_ROM_SHADOW we have to check if this is or should become
+ * the primary video card, since this quirk is ran for all video devices.
*/

static void pci_fixup_video(struct pci_dev *pdev)
@@ -347,12 +347,13 @@ static void pci_fixup_video(struct pci_dev *pdev)
}
bus = bus->parent;
}
- pci_read_config_word(pdev, PCI_COMMAND, &config);
- if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
- if (!vga_default_device())
+ if (!vga_default_device() || pdev == vga_default_device()) {
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
vga_set_default_device(pdev);
+ }
}
}
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
--
1.7.10.4[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2014-01-16 00:01    [W:0.159 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site