lkml.org 
[lkml]   [2014]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Problems with simple-card
On Wed, Jan 15, 2014 at 07:18:31PM +0100, Jean-Francois Moine wrote:

> The main problem is about sysclk: when there is no clock in the DT,
> you get the clock of the CPU or CODEC DAI. In my system, two clocks
> are declared in the controller CPU DAI, but there is no .set_sysclk
> pointer. So, snd_soc_dai_set_sysclk() returns -EINVAL and the card is
> not created.

set_sysclk() should be returning -ENOTSUPP in this case as with
set_fmt() and the generic code then ignoring that error.

> As I don't know why you need these fmt and sysclk, may you have a
> look at these problems?

The overwhelming majority of combinations of devices need a format
specifying (usually one will be imposed by the system design even if
both devices could be master).
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-01-15 20:41    [W:0.470 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site