lkml.org 
[lkml]   [2014]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3] mmc: atmel-mci: add vmmc-supply support
Hi,

I still don't see that on mmc.git, Any issue with that patch ? I would
prefer not missing the 3.14 merge window.

Regards

On 18/12/2013 09:16, Ludovic Desroches wrote:
> Hi Alexandre,
>
> On Tue, Dec 17, 2013 at 08:03:12PM +0100, Alexandre Belloni wrote:
>> Hi,
>>
>> It seems that patch never made it to the mainline. Is it still missing
>> something ?
>
> No reason on my side, maybe because my ack is missing but I thought I
> gave it on a previous version, maybe I am wrong.
>
> So Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
>
>
> Regards
>
> Ludovic
>
>>
>> Regards,
>>
>> On 17/10/2013 15:56, Ulf Hansson wrote:
>>> On 17 October 2013 12:46, Alexandre Belloni
>>> <alexandre.belloni@free-electrons.com> wrote:
>>>> Other MMC hosts handle a regulator named vmmc-supply that allows to power the
>>>> MMC card or SDIO device before communicating on the bus.
>>>>
>>>> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>>> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
>>>
>>>> ---
>>>>
>>>> Changes in v2:
>>>> - use mmc_regulator_get_supply instead of devm_regulator_get
>>>>
>>>> Changes in v3:
>>>> - en/disable the regulator in .set_ios using mmc_regulator_set_ocr
>>>>
>>>> drivers/mmc/host/atmel-mci.c | 7 +++++++
>>>> 1 file changed, 7 insertions(+)
>>>>
>>>> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
>>>> index 69e438e..a9e1ba6 100644
>>>> --- a/drivers/mmc/host/atmel-mci.c
>>>> +++ b/drivers/mmc/host/atmel-mci.c
>>>> @@ -1385,8 +1385,14 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>>> clk_unprepare(host->mck);
>>>>
>>>> switch (ios->power_mode) {
>>>> + case MMC_POWER_OFF:
>>>> + if (!IS_ERR(mmc->supply.vmmc))
>>>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>>>> + break;
>>>> case MMC_POWER_UP:
>>>> set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
>>>> + if (!IS_ERR(mmc->supply.vmmc))
>>>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
>>>> break;
>>>> default:
>>>> /*
>>>> @@ -2196,6 +2202,7 @@ static int __init atmci_init_slot(struct atmel_mci *host,
>>>> }
>>>>
>>>> host->slot[id] = slot;
>>>> + mmc_regulator_get_supply(mmc);
>>>> mmc_add_host(mmc);
>>>>
>>>> if (gpio_is_valid(slot->detect_pin)) {
>>>> --
>>>> 1.8.1.2
>>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>> --
>> Alexandre Belloni, Free Electrons
>> Embedded Linux, Kernel and Android engineering
>> http://free-electrons.com
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>


--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2014-01-13 19:01    [W:0.141 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site