Messages in this thread Patch in this message | | | From | Bjorn Andersson <> | Subject | [PATCH v2 1/2] i2c: qup: Add device tree bindings information | Date | Mon, 13 Jan 2014 16:30:36 -0800 |
| |
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and provide input and output FIFO's for it. I2C controller can operate as master with supported bus speeds of 100Kbps and 400Kbps.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> [bjorn: reformulated part of binding description and cleaned up example] Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> --- .../devicetree/bindings/i2c/qcom,i2c-qup.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt new file mode 100644 index 0000000..a99711b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt @@ -0,0 +1,41 @@ +Qualcomm Universal Peripheral (QUP) I2C controller + +Required properties: + - compatible: Should be "qcom,i2c-qup". + - reg: Should contain QUP register address and length. + - interrupts: Should contain I2C interrupt. + + - clocks: Should contain the core clock and the AHB clock. + - clock-names: Should be "core" for the core clock and "iface" for the + AHB clock. + + - #address-cells: Should be <1> Address cells for i2c device address + - #size-cells: Should be <0> as i2c addresses have no size component + +Optional properties: + - clock-frequency: Should specify the desired i2c bus clock frequency in Hz, + default is 100kHz if omitted. + +Child nodes should conform to i2c bus binding. + +Example: + + i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup"; + reg = <0xf9924000 0x1000>; + interrupts = <0 96 0>; + + clocks = <&gcc_blsp1_qup2_i2c_apps_clk>, <&gcc_blsp1_ahb_clk>; + clock-names = "core", "iface"; + + clock-frequency = <355000>; + + #address-cells = <1>; + #size-cells = <0>; + + dummy@60 { + compatible = "dummy"; + reg = <0x60>; + }; + }; + -- 1.8.2.2
| |