lkml.org 
[lkml]   [2014]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2 1/6] Documentation: add dts binding for X-Gene reboot dts node.
From
On Wed, Jan 8, 2014 at 2:05 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> On Tue, Jan 07, 2014 at 10:50:36PM +0000, Feng Kan wrote:
>> Add X-Gene reboot device tree node documentation.
>>
>> Signed-off-by: Feng Kan <fkan@apm.com>
>> ---
>> .../devicetree/bindings/arm64/xgene/reboot.txt | 10 ++++++++++
>> 1 files changed, 10 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/arm64/xgene/reboot.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm64/xgene/reboot.txt b/Documentation/devicetree/bindings/arm64/xgene/reboot.txt
>> new file mode 100644
>> index 0000000..51d23c1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm64/xgene/reboot.txt
>> @@ -0,0 +1,10 @@
>> +Reboot property to control system reboot on storm platforms:
>> +
>> +The register attribute contain the address of the reset register.
>
> Required properties:
>
> - compatible: should contain "apm,xgene-reboot"
>
> - reg: the base address and size of the reset register.
>
>> +
>> +Example:
>> +
>> + reboot@0 {
>> + compatible = "apm,xgene-reboot";
>> + reg = <0x0 0x17000014 0x0 0x4>;
>> + };
>
> Given this seems to be a 64-bit address, the unit address should
> preferably be 0,17000014 rather than just 0.

FKAN: Mark, can I keep this as it is to be consistent with the reset
of the file?
>
> Thanks,
> Mark.


\
 
 \ /
  Last update: 2014-01-11 02:41    [W:0.572 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site