lkml.org 
[lkml]   [2014]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] Input: synaptics-rmi4 - split of transport ops into a separate structure
On 01/09/2014 11:44 PM, Dmitry Torokhov wrote:
> Split off transport operations from rmi_transport_dev into a separate
> structure that will be shared between all devices using the same transport
> and use const pointer to access it.
>
> Change signature on transport methods so that length is using the proper
> tyep - size_t.
>
> Also rename rmi_transport_info to rmi_transport_stats and move protocol
> name (which is the only immutable piece of data there) into the transport
> device itself.

Acked-by: Christopher Heiny <cheiny@synaptics.com>

>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/rmi4/rmi_bus.h | 64 ++++++++++++++++++++++++-----------------
> drivers/input/rmi4/rmi_driver.c | 8 +++---
> drivers/input/rmi4/rmi_i2c.c | 49 ++++++++++++++++---------------
> 3 files changed, 67 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h
> index 3e8b57a..ccf26dc 100644
> --- a/drivers/input/rmi4/rmi_bus.h
> +++ b/drivers/input/rmi4/rmi_bus.h
> @@ -135,26 +135,25 @@ struct rmi_driver {
> #define to_rmi_driver(d) \
> container_of(d, struct rmi_driver, driver);
>
> -/** struct rmi_transport_info - diagnostic information about the RMI transport
> +/**
> + * struct rmi_transport_stats - diagnostic information about the RMI transport
> * device, used in the xport_info debugfs file.
> *
> * @proto String indicating the protocol being used.
> * @tx_count Number of transmit operations.
> - * @tx_bytes Number of bytes transmitted.
> * @tx_errs Number of errors encountered during transmit operations.
> + * @tx_bytes Number of bytes transmitted.
> * @rx_count Number of receive operations.
> - * @rx_bytes Number of bytes received.
> * @rx_errs Number of errors encountered during receive operations.
> - * @att_count Number of times ATTN assertions have been handled.
> + * @rx_bytes Number of bytes received.
> */
> -struct rmi_transport_info {
> - const char *proto;
> - long tx_count;
> - long tx_bytes;
> - long tx_errs;
> - long rx_count;
> - long rx_bytes;
> - long rx_errs;
> +struct rmi_transport_stats {
> + unsigned long tx_count;
> + unsigned long tx_errs;
> + size_t tx_bytes;
> + unsigned long rx_count;
> + unsigned long rx_errs;
> + size_t rx_bytes;
> };
>
> /**
> @@ -162,13 +161,14 @@ struct rmi_transport_info {
> *
> * @dev: Pointer to the communication device, e.g. i2c or spi
> * @rmi_dev: Pointer to the RMI device
> - * @write_block: Writing a block of data to the specified address
> - * @read_block: Read a block of data from the specified address.
> * @irq_thread: if not NULL, the sensor driver will use this instead of the
> * default irq_thread implementation.
> * @hard_irq: if not NULL, the sensor driver will use this for the hard IRQ
> * handling
> * @data: Private data pointer
> + * @proto_name: name of the transport protocol (SPI, i2c, etc)
> + * @ops: pointer to transport operations implementation
> + * @stats: transport statistics
> *
> * The RMI transport device implements the glue between different communication
> * buses such as I2C and SPI.
> @@ -178,20 +178,30 @@ struct rmi_transport_dev {
> struct device *dev;
> struct rmi_device *rmi_dev;
>
> - int (*write_block)(struct rmi_transport_dev *xport, u16 addr,
> - const void *buf, const int len);
> - int (*read_block)(struct rmi_transport_dev *xport, u16 addr,
> - void *buf, const int len);
> -
> - int (*enable_device) (struct rmi_transport_dev *xport);
> - void (*disable_device) (struct rmi_transport_dev *xport);
> -
> irqreturn_t (*irq_thread)(int irq, void *p);
> irqreturn_t (*hard_irq)(int irq, void *p);
>
> void *data;
>
> - struct rmi_transport_info info;
> + const char *proto_name;
> + const struct rmi_transport_ops *ops;
> + struct rmi_transport_stats stats;
> +};
> +
> +/**
> + * struct rmi_transport_ops - defines transport protocol operations.
> + *
> + * @write_block: Writing a block of data to the specified address
> + * @read_block: Read a block of data from the specified address.
> + */
> +struct rmi_transport_ops {
> + int (*write_block)(struct rmi_transport_dev *xport, u16 addr,
> + const void *buf, size_t len);
> + int (*read_block)(struct rmi_transport_dev *xport, u16 addr,
> + void *buf, size_t len);
> +
> + int (*enable_device) (struct rmi_transport_dev *xport);
> + void (*disable_device) (struct rmi_transport_dev *xport);
> };
>
> /**
> @@ -232,7 +242,7 @@ bool rmi_is_physical_device(struct device *dev);
> */
> static inline int rmi_read(struct rmi_device *d, u16 addr, void *buf)
> {
> - return d->xport->read_block(d->xport, addr, buf, 1);
> + return d->xport->ops->read_block(d->xport, addr, buf, 1);
> }
>
> /**
> @@ -248,7 +258,7 @@ static inline int rmi_read(struct rmi_device *d, u16 addr, void *buf)
> static inline int rmi_read_block(struct rmi_device *d, u16 addr, void *buf,
> const int len)
> {
> - return d->xport->read_block(d->xport, addr, buf, len);
> + return d->xport->ops->read_block(d->xport, addr, buf, len);
> }
>
> /**
> @@ -262,7 +272,7 @@ static inline int rmi_read_block(struct rmi_device *d, u16 addr, void *buf,
> */
> static inline int rmi_write(struct rmi_device *d, u16 addr, const u8 data)
> {
> - return d->xport->write_block(d->xport, addr, &data, 1);
> + return d->xport->ops->write_block(d->xport, addr, &data, 1);
> }
>
> /**
> @@ -278,7 +288,7 @@ static inline int rmi_write(struct rmi_device *d, u16 addr, const u8 data)
> static inline int rmi_write_block(struct rmi_device *d, u16 addr,
> const void *buf, const int len)
> {
> - return d->xport->write_block(d->xport, addr, buf, len);
> + return d->xport->ops->write_block(d->xport, addr, buf, len);
> }
>
> int rmi_register_transport_device(struct rmi_transport_dev *xport);
> diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
> index eb790ff..3483e5b 100644
> --- a/drivers/input/rmi4/rmi_driver.c
> +++ b/drivers/input/rmi4/rmi_driver.c
> @@ -126,8 +126,8 @@ static void disable_sensor(struct rmi_device *rmi_dev)
> if (!data->irq)
> disable_polling(rmi_dev);
>
> - if (rmi_dev->xport->disable_device)
> - rmi_dev->xport->disable_device(rmi_dev->xport);
> + if (rmi_dev->xport->ops->disable_device)
> + rmi_dev->xport->ops->disable_device(rmi_dev->xport);
>
> if (data->irq) {
> disable_irq(data->irq);
> @@ -146,8 +146,8 @@ static int enable_sensor(struct rmi_device *rmi_dev)
> if (data->enabled)
> return 0;
>
> - if (rmi_dev->xport->enable_device) {
> - retval = rmi_dev->xport->enable_device(rmi_dev->xport);
> + if (rmi_dev->xport->ops->enable_device) {
> + retval = rmi_dev->xport->ops->enable_device(rmi_dev->xport);
> if (retval)
> return retval;
> }
> diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
> index 12aea8c..40badf3 100644
> --- a/drivers/input/rmi4/rmi_i2c.c
> +++ b/drivers/input/rmi4/rmi_i2c.c
> @@ -61,11 +61,11 @@ static int rmi_set_page(struct rmi_transport_dev *xport, u8 page)
>
> dev_dbg(&client->dev, "writes 3 bytes: %02x %02x\n",
> txbuf[0], txbuf[1]);
> - xport->info.tx_count++;
> - xport->info.tx_bytes += sizeof(txbuf);
> + xport->stats.tx_count++;
> + xport->stats.tx_bytes += sizeof(txbuf);
> retval = i2c_master_send(client, txbuf, sizeof(txbuf));
> if (retval != sizeof(txbuf)) {
> - xport->info.tx_errs++;
> + xport->stats.tx_errs++;
> dev_err(&client->dev,
> "%s: set page failed: %d.", __func__, retval);
> return (retval < 0) ? retval : -EIO;
> @@ -75,12 +75,12 @@ static int rmi_set_page(struct rmi_transport_dev *xport, u8 page)
> }
>
> static int rmi_i2c_write_block(struct rmi_transport_dev *xport, u16 addr,
> - const void *buf, const int len)
> + const void *buf, size_t len)
> {
> struct i2c_client *client = to_i2c_client(xport->dev);
> struct rmi_i2c_data *data = xport->data;
> + size_t tx_size = len + 1;
> int retval;
> - int tx_size = len + 1;
>
> mutex_lock(&data->page_mutex);
>
> @@ -106,13 +106,13 @@ static int rmi_i2c_write_block(struct rmi_transport_dev *xport, u16 addr,
> }
>
> dev_dbg(&client->dev,
> - "writes %d bytes at %#06x: %*ph\n", len, addr, len, buf);
> + "writes %zd bytes at %#06x: %*ph\n", len, addr, (int)len, buf);
>
> - xport->info.tx_count++;
> - xport->info.tx_bytes += tx_size;
> + xport->stats.tx_count++;
> + xport->stats.tx_bytes += tx_size;
> retval = i2c_master_send(client, data->tx_buf, tx_size);
> if (retval < 0)
> - xport->info.tx_errs++;
> + xport->stats.tx_errs++;
> else
> retval--; /* don't count the address byte */
>
> @@ -121,9 +121,8 @@ exit:
> return retval;
> }
>
> -
> static int rmi_i2c_read_block(struct rmi_transport_dev *xport, u16 addr,
> - void *buf, const int len)
> + void *buf, size_t len)
> {
> struct i2c_client *client = to_i2c_client(xport->dev);
> struct rmi_i2c_data *data = xport->data;
> @@ -140,31 +139,36 @@ static int rmi_i2c_read_block(struct rmi_transport_dev *xport, u16 addr,
>
> dev_dbg(&client->dev, "writes 1 bytes: %02x\n", txbuf[0]);
>
> - xport->info.tx_count++;
> - xport->info.tx_bytes += sizeof(txbuf);
> + xport->stats.tx_count++;
> + xport->stats.tx_bytes += sizeof(txbuf);
> retval = i2c_master_send(client, txbuf, sizeof(txbuf));
> if (retval != sizeof(txbuf)) {
> - xport->info.tx_errs++;
> + xport->stats.tx_errs++;
> retval = (retval < 0) ? retval : -EIO;
> goto exit;
> }
>
> - retval = i2c_master_recv(client, buf, len);
> + xport->stats.rx_count++;
> + xport->stats.rx_bytes += len;
>
> - xport->info.rx_count++;
> - xport->info.rx_bytes += len;
> + retval = i2c_master_recv(client, buf, len);
> if (retval < 0)
> - xport->info.rx_errs++;
> + xport->stats.rx_errs++;
> else
> dev_dbg(&client->dev,
> - "read %d bytes at %#06x: %*ph\n",
> - len, addr, len, buf);
> + "read %zd bytes at %#06x: %*ph\n",
> + len, addr, (int)len, buf);
>
> exit:
> mutex_unlock(&data->page_mutex);
> return retval;
> }
>
> +static const struct rmi_transport_ops rmi_i2c_ops = {
> + .write_block = rmi_i2c_write_block,
> + .read_block = rmi_i2c_read_block,
> +};
> +
> static int rmi_i2c_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -214,9 +218,8 @@ static int rmi_i2c_probe(struct i2c_client *client,
> xport->data = data;
> xport->dev = &client->dev;
>
> - xport->write_block = rmi_i2c_write_block;
> - xport->read_block = rmi_i2c_read_block;
> - xport->info.proto = "i2c";
> + xport->proto_name = "i2c";
> + xport->ops = &rmi_i2c_ops;
>
> mutex_init(&data->page_mutex);
>
>


--

Christopher Heiny
Senior Staff Firmware Engineer
Synaptics Incorporated


\
 
 \ /
  Last update: 2014-01-11 00:41    [W:0.181 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site