lkml.org 
[lkml]   [2014]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/6] devicetree: bindings: Document Krait L1/L2 EDAC
On Thu, Jan 09, 2014 at 08:52:21PM +0000, Stephen Boyd wrote:
> On 01/08/14 02:05, Lorenzo Pieralisi wrote:
> > On Tue, Jan 07, 2014 at 08:12:39PM +0000, Stephen Boyd wrote:
> >> On 01/07, Lorenzo Pieralisi wrote:
> >>
> >>> I have a problem with the cache level definition, and in
> >>> particular the numbering, ie what the level number represents. If we
> >>> mean the cache level seen through the CLIDR and co., it is hard to use
> >>> it for shared caches since the level seen by different CPUs can actually
> >>> be different, or put it differently the level number might not be unique for
> >>> a shared cache. I need to think about a proper way to sort this out.
> >>>
> >> Ok. I don't even use this property in my driver. All I really
> >> need is the phandle from cpus pointing to the L2 and the
> >> interrupts property in the L2 node.
> >>
> >> How do you want to proceed here? If your cache binding goes
> >> through I would just need to add the interrupts part. Or you
> >> could even add that part in the same patch, you could have my
> >> signed-off-by for that.
> > Ok, I will try to update the bindings with the interrupt part and copy
> > you in, even though the level definition worries me a bit, it is an
> > important property for power management and I need to find a proper
> > solution before bindings can get accepted (basically the problem is:
> > if different CPUs can see a cache at different levels as defined in the
> > CLIDR we cannot describe a cache with a single cache level or put it
> > differently, level can not represent the value in the CLIDR hence we
> > need to describe it differently).
>
> Ok. I've dropped the cache part from this patch. I left the example as
> is minus the cache-level attribute.
>
> Understanding how the cache-level value would be used might help. I
> wonder if the cache-level can just be a number that describes the
> largest value that the cache could be assigned. Then if you have
> different CPUs seeing different levels of cache they can traverse from
> their CPU node to the cache and count how many phandles they went through.

Yes, that's one of the solutions I envisaged, and likely to be the one
that I will put forward since it requires almost no changes. If we go that way
cache-level becomes pretty useless though (which might be a good thing) and I
do not like the implicit cache level obtained by counting phandles.
Another option would be making cache-level a list and add a property
"cache-level-affinity" as 1:1 map list of phandles to cpu-map node to define for
each CPU the level at which that cache is mapped, somthing like the bindings
described here for IRQ affinity:

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/162466.html

I would say I tend to prefer the latter option, since I do not like relying
on unwritten rules (implicit level numbering implied by phandle traversal) but
I am open to suggestions.

Thanks,
Lorenzo



\
 
 \ /
  Last update: 2014-01-10 12:21    [W:0.047 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site