lkml.org 
[lkml]   [2013]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/6] scsi/csiostor: use pcie_capability_xxx to simplify code
Date
v1->v2: add #define for Completion Timeout Value, and use
pcie_capability_clear_and_set_word() instead suggested by Bjorn.

Pcie_capability_xxx() interfaces were introduced to
simplify code to access PCIe Cap config space. And
because PCI core saves the PCIe Cap offset in
set_pcie_port_type() when device is enumerated.
So we can use pci_is_pcie() instead.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Naresh Kumar Inna <naresh@chelsio.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/scsi/csiostor/csio_hw.c | 14 +++-----------
include/uapi/linux/pci_regs.h | 1 +
2 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index 0eb35b9..07f493a 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -855,17 +855,9 @@ csio_hw_get_flash_params(struct csio_hw *hw)
static void
csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range)
{
- uint16_t val;
- int pcie_cap;
-
- if (!csio_pci_capability(hw->pdev, PCI_CAP_ID_EXP, &pcie_cap)) {
- pci_read_config_word(hw->pdev,
- pcie_cap + PCI_EXP_DEVCTL2, &val);
- val &= 0xfff0;
- val |= range ;
- pci_write_config_word(hw->pdev,
- pcie_cap + PCI_EXP_DEVCTL2, val);
- }
+ if (pci_is_pcie(hw->pdev))
+ pcie_capability_clear_and_set_word(hw->pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_COMP_TIME, range);
}

/*****************************************************************************/
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index baa7852..cd74182 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -558,6 +558,7 @@
#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
+#define PCI_EXP_DEVCTL2_COMP_TIME 0x0f /* Completion Timeout Value */
#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */
#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */
--
1.7.1



\
 
 \ /
  Last update: 2013-09-05 10:21    [W:0.437 / U:1.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site