lkml.org 
[lkml]   [2013]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC PATCH 4/6] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs.
    Date
    Now with the crossbar IP in picture, the peripherals do not have the
    fixed interrupt lines. Instead they rely on the crossbar irqchip to
    allocate and map a free interrupt line to its crossbar input. So replacing
    all the peripheral interrupt numbers with its fixed crossbar input lines.

    Cc: Benoit Cousson <bcousson@baylibre.com>
    Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
    Cc: Rajendra Nayak <rnayak@ti.com>
    Cc: Tony Lindgren <tony@atomide.com>
    Signed-off-by: Sricharan R <r.sricharan@ti.com>
    ---
    arch/arm/boot/dts/dra7.dtsi | 88 +++++++++++++++++++++----------------------
    1 file changed, 44 insertions(+), 44 deletions(-)

    diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
    index 799b7be..bef1c99 100644
    --- a/arch/arm/boot/dts/dra7.dtsi
    +++ b/arch/arm/boot/dts/dra7.dtsi
    @@ -104,10 +104,10 @@
    sdma: dma-controller@4a056000 {
    compatible = "ti,omap4430-sdma";
    reg = <0x4a056000 0x1000>;
    - interrupts = <0 12 0x4>,
    - <0 13 0x4>,
    - <0 14 0x4>,
    - <0 15 0x4>;
    + interrupts = <0 7 0x4>,
    + <0 8 0x4>,
    + <0 9 0x4>,
    + <0 10 0x4>;
    #dma-cells = <1>;
    #dma-channels = <32>;
    #dma-requests = <127>;
    @@ -116,7 +116,7 @@
    gpio1: gpio@4ae10000 {
    compatible = "ti,omap4-gpio";
    reg = <0x4ae10000 0x200>;
    - interrupts = <0 29 0x4>;
    + interrupts = <0 24 0x4>;
    ti,hwmods = "gpio1";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -127,7 +127,7 @@
    gpio2: gpio@48055000 {
    compatible = "ti,omap4-gpio";
    reg = <0x48055000 0x200>;
    - interrupts = <0 30 0x4>;
    + interrupts = <0 25 0x4>;
    ti,hwmods = "gpio2";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -138,7 +138,7 @@
    gpio3: gpio@48057000 {
    compatible = "ti,omap4-gpio";
    reg = <0x48057000 0x200>;
    - interrupts = <0 31 0x4>;
    + interrupts = <0 26 0x4>;
    ti,hwmods = "gpio3";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -149,7 +149,7 @@
    gpio4: gpio@48059000 {
    compatible = "ti,omap4-gpio";
    reg = <0x48059000 0x200>;
    - interrupts = <0 32 0x4>;
    + interrupts = <0 27 0x4>;
    ti,hwmods = "gpio4";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -160,7 +160,7 @@
    gpio5: gpio@4805b000 {
    compatible = "ti,omap4-gpio";
    reg = <0x4805b000 0x200>;
    - interrupts = <0 33 0x4>;
    + interrupts = <0 28 0x4>;
    ti,hwmods = "gpio5";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -171,7 +171,7 @@
    gpio6: gpio@4805d000 {
    compatible = "ti,omap4-gpio";
    reg = <0x4805d000 0x200>;
    - interrupts = <0 34 0x4>;
    + interrupts = <0 29 0x4>;
    ti,hwmods = "gpio6";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -182,7 +182,7 @@
    gpio7: gpio@48051000 {
    compatible = "ti,omap4-gpio";
    reg = <0x48051000 0x200>;
    - interrupts = <0 35 0x4>;
    + interrupts = <0 30 0x4>;
    ti,hwmods = "gpio7";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -193,7 +193,7 @@
    gpio8: gpio@48053000 {
    compatible = "ti,omap4-gpio";
    reg = <0x48053000 0x200>;
    - interrupts = <0 121 0x4>;
    + interrupts = <0 116 0x4>;
    ti,hwmods = "gpio8";
    gpio-controller;
    #gpio-cells = <2>;
    @@ -204,7 +204,7 @@
    uart1: serial@4806a000 {
    compatible = "ti,omap4-uart";
    reg = <0x4806a000 0x100>;
    - interrupts = <0 72 0x4>;
    + interrupts = <0 67 0x4>;
    ti,hwmods = "uart1";
    clock-frequency = <48000000>;
    };
    @@ -212,7 +212,7 @@
    uart2: serial@4806c000 {
    compatible = "ti,omap4-uart";
    reg = <0x4806c000 0x100>;
    - interrupts = <0 73 0x4>;
    + interrupts = <0 68 0x4>;
    ti,hwmods = "uart2";
    clock-frequency = <48000000>;
    };
    @@ -220,7 +220,7 @@
    uart3: serial@48020000 {
    compatible = "ti,omap4-uart";
    reg = <0x48020000 0x100>;
    - interrupts = <0 74 0x4>;
    + interrupts = <0 69 0x4>;
    ti,hwmods = "uart3";
    clock-frequency = <48000000>;
    };
    @@ -228,7 +228,7 @@
    uart4: serial@4806e000 {
    compatible = "ti,omap4-uart";
    reg = <0x4806e000 0x100>;
    - interrupts = <0 70 0x4>;
    + interrupts = <0 65 0x4>;
    ti,hwmods = "uart4";
    clock-frequency = <48000000>;
    };
    @@ -236,7 +236,7 @@
    uart5: serial@48066000 {
    compatible = "ti,omap4-uart";
    reg = <0x48066000 0x100>;
    - interrupts = <0 105 0x4>;
    + interrupts = <0 100 0x4>;
    ti,hwmods = "uart5";
    clock-frequency = <48000000>;
    };
    @@ -244,7 +244,7 @@
    uart6: serial@48068000 {
    compatible = "ti,omap4-uart";
    reg = <0x48068000 0x100>;
    - interrupts = <0 106 0x4>;
    + interrupts = <0 101 0x4>;
    ti,hwmods = "uart6";
    clock-frequency = <48000000>;
    };
    @@ -252,7 +252,7 @@
    timer1: timer@4ae18000 {
    compatible = "ti,omap5430-timer";
    reg = <0x4ae18000 0x80>;
    - interrupts = <0 37 0x4>;
    + interrupts = <0 32 0x4>;
    ti,hwmods = "timer1";
    ti,timer-alwon;
    };
    @@ -260,28 +260,28 @@
    timer2: timer@48032000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48032000 0x80>;
    - interrupts = <0 38 0x4>;
    + interrupts = <0 33 0x4>;
    ti,hwmods = "timer2";
    };

    timer3: timer@48034000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48034000 0x80>;
    - interrupts = <0 39 0x4>;
    + interrupts = <0 34 0x4>;
    ti,hwmods = "timer3";
    };

    timer4: timer@48036000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48036000 0x80>;
    - interrupts = <0 40 0x4>;
    + interrupts = <0 35 0x4>;
    ti,hwmods = "timer4";
    };

    timer5: timer@48820000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48820000 0x80>;
    - interrupts = <0 41 0x4>;
    + interrupts = <0 36 0x4>;
    ti,hwmods = "timer5";
    ti,timer-dsp;
    };
    @@ -289,7 +289,7 @@
    timer6: timer@48822000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48822000 0x80>;
    - interrupts = <0 42 0x4>;
    + interrupts = <0 37 0x4>;
    ti,hwmods = "timer6";
    ti,timer-dsp;
    ti,timer-pwm;
    @@ -298,7 +298,7 @@
    timer7: timer@48824000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48824000 0x80>;
    - interrupts = <0 43 0x4>;
    + interrupts = <0 38 0x4>;
    ti,hwmods = "timer7";
    ti,timer-dsp;
    };
    @@ -306,7 +306,7 @@
    timer8: timer@48826000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48826000 0x80>;
    - interrupts = <0 44 0x4>;
    + interrupts = <0 39 0x4>;
    ti,hwmods = "timer8";
    ti,timer-dsp;
    ti,timer-pwm;
    @@ -315,21 +315,21 @@
    timer9: timer@4803e000 {
    compatible = "ti,omap5430-timer";
    reg = <0x4803e000 0x80>;
    - interrupts = <0 45 0x4>;
    + interrupts = <0 40 0x4>;
    ti,hwmods = "timer9";
    };

    timer10: timer@48086000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48086000 0x80>;
    - interrupts = <0 46 0x4>;
    + interrupts = <0 41 0x4>;
    ti,hwmods = "timer10";
    };

    timer11: timer@48088000 {
    compatible = "ti,omap5430-timer";
    reg = <0x48088000 0x80>;
    - interrupts = <0 47 0x4>;
    + interrupts = <0 42 0x4>;
    ti,hwmods = "timer11";
    ti,timer-pwm;
    };
    @@ -337,21 +337,21 @@
    wdt2: wdt@4ae14000 {
    compatible = "ti,omap4-wdt";
    reg = <0x4ae14000 0x80>;
    - interrupts = <0 80 0x4>;
    + interrupts = <0 75 0x4>;
    ti,hwmods = "wd_timer2";
    };

    dmm: dmm@4e000000 {
    compatible = "ti,omap5-dmm";
    reg = <0x4e000000 0x800>;
    - interrupts = <0 113 0x4>;
    + interrupts = <0 108 0x4>;
    ti,hwmods = "dmm";
    };

    i2c1: i2c@48070000 {
    compatible = "ti,omap4-i2c";
    reg = <0x48070000 0x100>;
    - interrupts = <0 56 0x4>;
    + interrupts = <0 51 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "i2c1";
    @@ -360,7 +360,7 @@
    i2c2: i2c@48072000 {
    compatible = "ti,omap4-i2c";
    reg = <0x48072000 0x100>;
    - interrupts = <0 57 0x4>;
    + interrupts = <0 52 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "i2c2";
    @@ -369,7 +369,7 @@
    i2c3: i2c@48060000 {
    compatible = "ti,omap4-i2c";
    reg = <0x48060000 0x100>;
    - interrupts = <0 61 0x4>;
    + interrupts = <0 56 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "i2c3";
    @@ -378,7 +378,7 @@
    i2c4: i2c@4807a000 {
    compatible = "ti,omap4-i2c";
    reg = <0x4807a000 0x100>;
    - interrupts = <0 62 0x4>;
    + interrupts = <0 57 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "i2c4";
    @@ -387,7 +387,7 @@
    i2c5: i2c@4807c000 {
    compatible = "ti,omap4-i2c";
    reg = <0x4807c000 0x100>;
    - interrupts = <0 60 0x4>;
    + interrupts = <0 55 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "i2c5";
    @@ -396,7 +396,7 @@
    mmc1: mmc@4809c000 {
    compatible = "ti,omap4-hsmmc";
    reg = <0x4809c000 0x400>;
    - interrupts = <0 83 0x4>;
    + interrupts = <0 78 0x4>;
    ti,hwmods = "mmc1";
    ti,dual-volt;
    ti,needs-special-reset;
    @@ -407,7 +407,7 @@
    mmc2: mmc@480b4000 {
    compatible = "ti,omap4-hsmmc";
    reg = <0x480b4000 0x400>;
    - interrupts = <0 86 0x4>;
    + interrupts = <0 81 0x4>;
    ti,hwmods = "mmc2";
    ti,needs-special-reset;
    dmas = <&sdma 47>, <&sdma 48>;
    @@ -417,7 +417,7 @@
    mmc3: mmc@480ad000 {
    compatible = "ti,omap4-hsmmc";
    reg = <0x480ad000 0x400>;
    - interrupts = <0 94 0x4>;
    + interrupts = <0 89 0x4>;
    ti,hwmods = "mmc3";
    ti,needs-special-reset;
    dmas = <&sdma 77>, <&sdma 78>;
    @@ -427,7 +427,7 @@
    mmc4: mmc@480d1000 {
    compatible = "ti,omap4-hsmmc";
    reg = <0x480d1000 0x400>;
    - interrupts = <0 96 0x4>;
    + interrupts = <0 91 0x4>;
    ti,hwmods = "mmc4";
    ti,needs-special-reset;
    dmas = <&sdma 57>, <&sdma 58>;
    @@ -437,7 +437,7 @@
    mcspi1: spi@48098000 {
    compatible = "ti,omap4-mcspi";
    reg = <0x48098000 0x200>;
    - interrupts = <0 65 0x4>;
    + interrupts = <0 60 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "mcspi1";
    @@ -457,7 +457,7 @@
    mcspi2: spi@4809a000 {
    compatible = "ti,omap4-mcspi";
    reg = <0x4809a000 0x200>;
    - interrupts = <0 66 0x4>;
    + interrupts = <0 61 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "mcspi2";
    @@ -472,7 +472,7 @@
    mcspi3: spi@480b8000 {
    compatible = "ti,omap4-mcspi";
    reg = <0x480b8000 0x200>;
    - interrupts = <0 91 0x4>;
    + interrupts = <0 86 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "mcspi3";
    @@ -484,7 +484,7 @@
    mcspi4: spi@480ba000 {
    compatible = "ti,omap4-mcspi";
    reg = <0x480ba000 0x200>;
    - interrupts = <0 48 0x4>;
    + interrupts = <0 43 0x4>;
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "mcspi4";
    --
    1.7.9.5


    \
     
     \ /
      Last update: 2013-09-30 16:21    [W:4.820 / U:0.140 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site