lkml.org 
[lkml]   [2013]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
On Tuesday 24 September 2013 01:24 PM, Javier Martinez Canillas wrote:
> On 09/24/2013 09:39 AM, Sricharan R wrote:
>> Hi,
>> On Monday 23 September 2013 10:37 PM, Tony Lindgren wrote:
>>> * Javier Martinez Canillas <javier.martinez@collabora.co.uk> [130923 10:09]:
>>>> On 09/23/2013 06:45 PM, Tony Lindgren wrote:
>>>>> Hmm does this still work for legacy platform data based
>>>>> drivers that are doing gpio_request() first?
>>>>>
>>>> Yes it still work when booting using board files. I tested on my OMAP3 board and
>>>> it worked in both DT and legacy booting mode.
>>> OK great.
>>>
>>>>> And what's the path for clearing things for PM when free_irq()
>>>>> gets called? It seems that this would leave the GPIO bank
>>>>> enabled causing a PM regression?
>>>>>
>>>> Indeed, I did set bank->mod_usage |= 1 << offset so the bank is enabled if the
>>>> device goes to suspended and then resumed but I completely forget about the
>>>> clearing path when the IRQ is freed.
>>>>
>>>> Which makes me think that we should probably maintain two usage variables, one
>>>> for GPIO and another one for IRQ and check both of them on the suspend/resume pm
>>>> functions.
>>> Yes that it seems that they should be treated separately.
>> To understand, why cant the flag be cleared in gpio_irq_shutdown ?
> Hi Sricharan,
>
> Without this patch today drivers do this:
>
> gpio_request(gpio, "foo IRQ"); // bank->mod_usage |= 1 << offset
> gpio_direction_input(gpio);
>
> and then request a IRQ with:
>
> irq = gpio_to_irq(gpio);
> request_irq(irq, ...);
>
> later on its cleanup path:
>
> free_irq(irq, dev);
> gpio_free(gpio) // bank->mod_usage &= ~(1 << offset);
>
> So if you clear the flag on gpio_irq_shutdown then bank module won't be enabled
> after a suspend making drivers using the GPIO after freeing the IRQ to fail.
>
> So the idea is to have something like this:
>
> a) Drivers that request both the GPIO and IRQ
>
> gpio_request(gpio, "foo IRQ"); // bank->mod_usage |= 1 << offset
> gpio_direction_input(gpio);
>
> irq = gpio_to_irq(gpio);
> request_irq(irq, ...); // bank->irq_usage |= 1 << offset
>
> free_irq(irq, dev); // bank->irq_usage &= ~(1 << offset);
> gpio_free(gpio) // bank->mod_usage &= ~(1 << offset);
>
> b) Drivers that just request the IRQ:
>
> irq = gpio_to_irq(gpio);
> request_irq(irq, ...); // bank->irq_usage |= 1 << offset
> free_irq(irq, dev); // bank->irq_usage &= ~(1 << offset);
>
> So irq_usage or mod_usage is set means that the bank has to be enabled and if
> both are not set means that the bank module can be disabled.
>
Ok get it. Thanks.

Regards,
Sricharan


\
 
 \ /
  Last update: 2013-09-24 11:21    [W:0.080 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site