lkml.org 
[lkml]   [2013]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 005/117] drm/i915: make user mode sync polarity setting explicit
Date
3.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Imre Deak <imre.deak@intel.com>

commit 2960bc9cceecb5d556ce1c07656a6609e2f7e8b0 upstream.

Userspace can pass a mode with an unspecified vsync/hsync polarity
setting. All encoders in the Intel driver take this to mean a negative
polarity setting. The HW readout/state checker code on the other hand
needs these flags to be explicitly set, otherwise the state checker will
WARN about the mismatch.

Get rid of the WARN by making the polarity setting explicit in the
adjusted mode flags based on the requested mode flags. This will keep
the existing behavior otherwise.

Note that we could guess from the other timing parameters whether the
user wanted a VESA or other standard mode and set the polarity
accordingly. This is what the NV driver does
(drivers/gpu/drm/nouveau/dispnv04/crtc.c), but I think that's not very
exact and would change the existing behavior of the Intel driver.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65442
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: cancan,feng <cancan.feng@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpu/drm/i915/intel_display.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7809,6 +7809,19 @@ intel_modeset_pipe_config(struct drm_crt
pipe_config->cpu_transcoder = to_intel_crtc(crtc)->pipe;
pipe_config->shared_dpll = DPLL_ID_PRIVATE;

+ /*
+ * Sanitize sync polarity flags based on requested ones. If neither
+ * positive or negative polarity is requested, treat this as meaning
+ * negative polarity.
+ */
+ if (!(pipe_config->adjusted_mode.flags &
+ (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
+ pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (!(pipe_config->adjusted_mode.flags &
+ (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
+ pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
+
/* Compute a starting value for pipe_config->pipe_bpp taking the source
* plane pixel format and any sink constraints into account. Returns the
* source plane bpp so that dithering can be selected on mismatches



\
 
 \ /
  Last update: 2013-09-25 09:21    [W:0.258 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site