lkml.org 
[lkml]   [2013]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[RFCv2 0/3] OMAP SSI driver
    Date
    Hi,

    Here is the second round of the OMAP SSI driver patches.

    In this round I added/fixed:
    - Usage of runtime PM
    Previously runtime PM was only used to enable/disable the involved
    clocks. Now the driver makes use of resume/suspend callbacks, which
    simplified its code (the driver did its own reference counting).
    - Removal of deprecated IRQF_DISABLED flag from irq requests
    - HWMOD: set SSI parent to L4-Core instead of L3
    I checked the public OMAP3 TRM, which assigns the address space used
    by the driver as reserved L4-Core address space.
    - HWMOD: removed data, which will be specified via Device Tree
    - Change omap_ssi_port.wktest and omap_ssi_port.wkin_cken from
    "unsigned int" to "bool"
    - Change omap_ssi_port.wk_refcount from "int" to "unsigned int"
    - Convert __raw_read* to read*_relaxed / write*_relaxed
    - Removal of involved platform and board code
    - Split driver into omap_ssi.c and omap_ssi_port.c
    This changes helps in making the DT interface cleaner.
    - Creation & Documentation of DT bindings

    TODO:
    - Central Message Queue
    I did not yet implement a central message queue in the HSI framework.
    I would prefer to do this after SSI is working in the mainline kernel,
    since that makes testing easier.
    - HSI client registration via DT
    This needs changes in the HSI framework, which currently assumes,
    that clients are registered via board support code. This is more
    or less independent of the controller and should be added in an
    independent patchset IMHO.

    Version 1 (*) of the patchset: https://lkml.org/lkml/2013/8/11/67

    (*) There have been patchsets send out by Carlos before my RFCv1,
    see RFCv1 for details.

    -- Sebastian

    Sebastian Reichel (3):
    ARM: OMAP2+: hwmod-data: Add SSI information
    ARM: OMAP2+: HSI: Introduce OMAP SSI driver
    ARM: dts: N900: Add SSI information

    Documentation/devicetree/bindings/hsi/omap_ssi.txt | 73 ++
    arch/arm/boot/dts/omap3-n900.dts | 8 +
    arch/arm/boot/dts/omap34xx.dtsi | 49 +
    arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 48 +
    drivers/hsi/Kconfig | 1 +
    drivers/hsi/Makefile | 1 +
    drivers/hsi/controllers/Kconfig | 20 +
    drivers/hsi/controllers/Makefile | 6 +
    drivers/hsi/controllers/omap_ssi.c | 585 +++++++++
    drivers/hsi/controllers/omap_ssi.h | 167 +++
    drivers/hsi/controllers/omap_ssi_port.c | 1346 ++++++++++++++++++++
    drivers/hsi/controllers/omap_ssi_regs.h | 172 +++
    12 files changed, 2476 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt
    create mode 100644 drivers/hsi/controllers/Kconfig
    create mode 100644 drivers/hsi/controllers/Makefile
    create mode 100644 drivers/hsi/controllers/omap_ssi.c
    create mode 100644 drivers/hsi/controllers/omap_ssi.h
    create mode 100644 drivers/hsi/controllers/omap_ssi_port.c
    create mode 100644 drivers/hsi/controllers/omap_ssi_regs.h

    --
    1.8.4.rc3



    \
     
     \ /
      Last update: 2013-09-15 23:01    [W:3.753 / U:0.096 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site