lkml.org 
[lkml]   [2013]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] Documentation: dt: hwmon: add OF document for LM90
Date
Add OF document for LM90 in Documentation/devicetree/.

Signed-off-by: Wei Ni <wni@nvidia.com>
---
Documentation/devicetree/bindings/hwmon/lm90.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt

diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
new file mode 100644
index 0000000..6888498
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm90.txt
@@ -0,0 +1,44 @@
+* LM90 series thermometer.
+
+Required node properties:
+- compatible: manufacturer and chip name, one of
+ "adi,adm1032"
+ "adi,adt7461"
+ "adi,adt7461a"
+ "gmt,g781"
+ "national,lm90"
+ "national,lm86"
+ "national,lm89"
+ "national,lm99"
+ "dallas,max6646"
+ "dallas,max6647"
+ "dallas,max6649"
+ "dallas,max6657"
+ "dallas,max6658"
+ "dallas,max6659"
+ "dallas,max6680"
+ "dallas,max6681"
+ "dallas,max6695"
+ "dallas,max6696"
+ "onnn,nct1008"
+ "winbond,w83l771"
+ "nxp,sa56004"
+
+- reg: I2C bus address of the device
+
+Optional properties:
+- vcc-supply: vcc regulator for the supply voltage.
+ If this is not set, assuming vcc is always powered.
+- interrupts: Contains a single interrupt specifier which describes the
+ LM90 "-ALERT" pin output.
+ See interrupt-controller/interrupts.txt for the format.
+
+Example LM90 node:
+
+temp-sensor {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vcc-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+}
--
1.7.9.5


\
 
 \ /
  Last update: 2013-09-12 14:21    [W:0.156 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site