lkml.org 
[lkml]   [2013]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] input: ti_tsc: Enable shared IRQ for TSC
On 07/27/13 00:51, Zubair Lutfullah wrote:
> From: "Patil, Rachna" <rachna@ti.com>
>
> Touchscreen and ADC share the same IRQ line from parent MFD core.
> Previously only Touchscreen was interrupt based.
> With continuous mode support added in ADC driver, driver requires
> interrupt to process the ADC samples, so enable shared IRQ flag bit for
> touchscreen.
>
> Signed-off-by: Patil, Rachna <rachna@ti.com>
> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
> Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I'd rather this went via input independent of the other patch
(if not there all that will happen is one or other driver will
fail to probe if both are attempted?)

Can take it through IIO but only with a Dmitry Ack.

> ---
> drivers/input/touchscreen/ti_am335x_tsc.c | 18 ++++++++++++++----
> 1 file changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index e1c5300..68d1250 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -260,8 +260,18 @@ static irqreturn_t titsc_irq(int irq, void *dev)
> unsigned int fsm;
>
> status = titsc_readl(ts_dev, REG_IRQSTATUS);
> - if (status & IRQENB_FIFO0THRES) {
> -
> + /*
> + * ADC and touchscreen share the IRQ line.
> + * FIFO1 threshold, FIFO1 Overrun and FIFO1 underflow
> + * interrupts are used by ADC,
> + * hence return from touchscreen IRQ handler if FIFO1
> + * related interrupts occurred.
> + */
> + if ((status & IRQENB_FIFO1THRES) ||
> + (status & IRQENB_FIFO1OVRRUN) ||
> + (status & IRQENB_FIFO1UNDRFLW))
> + return IRQ_NONE;
> + else if (status & IRQENB_FIFO0THRES) {
> titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
>
> if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
> @@ -315,7 +325,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
> }
>
> if (irqclr) {
> - titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
> + titsc_writel(ts_dev, REG_IRQSTATUS, (status | irqclr));
> am335x_tsc_se_update(ts_dev->mfd_tscadc);
> return IRQ_HANDLED;
> }
> @@ -389,7 +399,7 @@ static int titsc_probe(struct platform_device *pdev)
> }
>
> err = request_irq(ts_dev->irq, titsc_irq,
> - 0, pdev->dev.driver->name, ts_dev);
> + IRQF_SHARED, pdev->dev.driver->name, ts_dev);
> if (err) {
> dev_err(&pdev->dev, "failed to allocate irq.\n");
> goto err_free_mem;
>


\
 
 \ /
  Last update: 2013-08-04 13:01    [W:1.841 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site