lkml.org 
[lkml]   [2013]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: linux-next: manual merge of the pinctrl tree with Linus' tree
From
On Thu, Aug 29, 2013 at 9:17 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:

> I fixed it up (see below) and can carry the fix as necessary (no action
> is required).

I made a bit different fix, I just lock the spinlock around the entire
loop, as this is not doing any delays or anything like that and
just hammer a few registers with the settings, it makes sense to
have that inside a single lock:

--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@@ -282,48 -282,57 +283,51 @@@ static int sunxi_pconf_group_set(struc
u32 val, mask;
u16 strength;
u8 dlevel;
+ int i;

- switch (pinconf_to_config_param(config)) {
- case PIN_CONFIG_DRIVE_STRENGTH:
- strength = pinconf_to_config_argument(config);
- if (strength > 40)
- return -EINVAL;
- /*
- * We convert from mA to what the register expects:
- * 0: 10mA
- * 1: 20mA
- * 2: 30mA
- * 3: 40mA
- */
- dlevel = strength / 10 - 1;
-
- spin_lock_irqsave(&pctl->lock, flags);
-
- val = readl(pctl->membase + sunxi_dlevel_reg(g->pin));
- mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(g->pin);
- writel((val & ~mask) | dlevel << sunxi_dlevel_offset(g->pin),
- pctl->membase + sunxi_dlevel_reg(g->pin));
-
- spin_unlock_irqrestore(&pctl->lock, flags);
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
- spin_lock_irqsave(&pctl->lock, flags);
-
- val = readl(pctl->membase + sunxi_pull_reg(g->pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin);
- writel((val & ~mask) | 1 << sunxi_pull_offset(g->pin),
- pctl->membase + sunxi_pull_reg(g->pin));
-
- spin_unlock_irqrestore(&pctl->lock, flags);
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
- spin_lock_irqsave(&pctl->lock, flags);
-
- val = readl(pctl->membase + sunxi_pull_reg(g->pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin);
- writel((val & ~mask) | 2 << sunxi_pull_offset(g->pin),
- pctl->membase + sunxi_pull_reg(g->pin));
++ spin_lock_irqsave(&pctl->lock, flags);
+
- spin_unlock_irqrestore(&pctl->lock, flags);
- break;
- default:
- break;
- }
+ for (i = 0; i < num_configs; i++) {
+ switch (pinconf_to_config_param(configs[i])) {
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ strength = pinconf_to_config_argument(configs[i]);
+ if (strength > 40)
+ return -EINVAL;
+ /*
+ * We convert from mA to what the register expects:
+ * 0: 10mA
+ * 1: 20mA
+ * 2: 30mA
+ * 3: 40mA
+ */
+ dlevel = strength / 10 - 1;
+ val = readl(pctl->membase + sunxi_dlevel_reg(g->pin));
+ mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(g->pin);
+ writel((val & ~mask)
+ | dlevel << sunxi_dlevel_offset(g->pin),
+ pctl->membase + sunxi_dlevel_reg(g->pin));
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ val = readl(pctl->membase + sunxi_pull_reg(g->pin));
+ mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin);
+ writel((val & ~mask) | 1 << sunxi_pull_offset(g->pin),
+ pctl->membase + sunxi_pull_reg(g->pin));
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ val = readl(pctl->membase + sunxi_pull_reg(g->pin));
+ mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin);
+ writel((val & ~mask) | 2 << sunxi_pull_offset(g->pin),
+ pctl->membase + sunxi_pull_reg(g->pin));
+ break;
+ default:
+ break;
+ }
-
+ /* cache the config value */
+ g->config = configs[i];
+ } /* for each config */

- /* cache the config value */
- g->config = config;
++ spin_unlock_irqrestore(&pctl->lock, flags);
+
return 0;
}


Yours,
Linus Walleij


\
 
 \ /
  Last update: 2013-08-29 14:01    [W:0.223 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site