lkml.org 
[lkml]   [2013]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 33/40] ARM: ux500: Don't register the STMPE/SKE when booting with ATAG support
From
On Fri, Aug 23, 2013 at 2:55 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Fri, Aug 23, 2013 at 2:23 PM, Lee Jones <lee.jones@linaro.org> wrote:
>
>> It's time to remove all ATAG support from ux500 and rely solely on
>> Device Tree booting. This patch is part of that endeavour.
>>
>> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> (...)
>> -/* STMPE/SKE keypad use this key layout */
>> -static const unsigned int mop500_keymap[] = {
>> - KEY(2, 5, KEY_END),
>> - KEY(4, 1, KEY_POWER),
>> - KEY(3, 5, KEY_VOLUMEDOWN),
>> - KEY(1, 3, KEY_3),
>> - KEY(5, 2, KEY_RIGHT),
>> - KEY(5, 0, KEY_9),
>> -
>> - KEY(0, 5, KEY_MENU),
>> - KEY(7, 6, KEY_ENTER),
>> - KEY(4, 5, KEY_0),
>> - KEY(6, 7, KEY_2),
>> - KEY(3, 4, KEY_UP),
>> - KEY(3, 3, KEY_DOWN),
>> -
>> - KEY(6, 4, KEY_SEND),
>> - KEY(6, 2, KEY_BACK),
>> - KEY(4, 2, KEY_VOLUMEUP),
>> - KEY(5, 5, KEY_1),
>> - KEY(4, 3, KEY_LEFT),
>> - KEY(3, 2, KEY_7),
>> -};
>
> This STMPE1601 keypad @0x40 and UIB encoding for
> the U8500 UIB does not exist in any DTS file does it? This
> means that the support for this UIB is effectively terminated.

You are wrong. Go read arch/arm/boot/dts/[ste-]stuib.dtsi.

Anyway, what you wanted to say was for these to be marked
"disabled" by default and turned into "okay" using an I2C
probe operation.

Yours,
Linus Walleij


\
 
 \ /
  Last update: 2013-08-23 15:21    [W:1.341 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site