Messages in this thread | | | Date | Wed, 21 Aug 2013 11:35:40 +0200 | From | Nicolas Ferre <> | Subject | Re: [PATCH v2 0/3] arm: atmel: at91sam9n12: add i2c pinctrl and qt1070 support |
| |
On 11/07/2013 05:30, Bo Shen : > this patch is based on linux master branch, implementation as following: > - add the i2c pinctrl which needed for using at91sam9n12 TWI > - enable qt1070 > - trival fix for the gpio-key pin number
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
On the whole series.
> > Changes in v2: > - remove comments as use micro > - using micro for interrupt trigger mode > > Bo Shen (3): > arm: atmel: at91sam9n12: add pinctrl of TWI
Beware: 1/ "arm" in upper case 2/ not "atmel" as second identifier but "at91" (lower case)
> arm: atmel: at91sam9n12: add qt1070 support > arm: atmel: at91sam9n12: correct pin number of gpio-key > > arch/arm/boot/dts/at91sam9n12.dtsi | 20 ++++++++++++++++++++ > arch/arm/boot/dts/at91sam9n12ek.dts | 18 +++++++++++++++++- > 2 files changed, 37 insertions(+), 1 deletion(-) >
-- Nicolas Ferre
| |