lkml.org 
[lkml]   [2013]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] Documentation: Add device tree bindings for Freescale FTM PWM
Date
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
.../devicetree/bindings/pwm/fsl-ftm-pwm.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt

diff --git a/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt b/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
new file mode 100644
index 0000000..698965b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
@@ -0,0 +1,52 @@
+Freescale FTM PWM controller
+
+Required properties:
+- compatible: should be "fsl,vf610-ftm-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
+ First cell specifies the per-chip channel index of the PWM to use, the
+ second cell is the period in nanoseconds and bit 0 in the third cell is
+ used to encode the polarity of PWM output. Set bit 0 of the third in PWM
+ specifier to 1 for inverse polarity & set to 0 for normal polarity.
+- fsl,pwm-clk-ps: the ftm0 pwm clock's prescaler, divide-by 2^n(n = 0 ~ 7).
+- fsl,pwm-cpwm: Center-Aligned PWM (CPWM) mode.
+- fsl,pwm-number: the number of PWM devices, and is must equal to the number
+ of "fsl,pwm-channels".
+- fsl,pwm-channels: the channels' order which is be used for pwm in ftm0
+ module, and they must be one or some of 0 ~ 7, because the ftm0 only has
+ 8 channels can be used.
+- for very channel, the revlatived the pinctrl should be at least two state
+ {"enN", "dsN"}, which "en" means "enable", "ds" means "disable" and "N"
+ means the order of the channel.
+
+Example:
+
+pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x40038000 0x1000>;
+ #pwm-cells = <3>;
+ pinctrl-names = "en0", "ds0", "en3", "ds3";
+ pinctrl-0 = <&pinctrl_pwm0_ch0_en>;
+ pinctrl-1 = <&pinctrl_pwm0_ch0_ds>;
+ pinctrl-2 = <&pinctrl_pwm0_ch3_en>;
+ pinctrl-3 = <&pinctrl_pwm0_ch3_ds>;
+ fsl,pwm-clk-ps = <7>;
+ fsl,pwm-cpwm = <0>;
+ fsl,pwm-number = <2>;
+ fsl,pwm-channels = <0 3>;
+ ...
+ };
+
+leds {
+ compatible = "pwm-leds";
+ led {
+ label = "fsl_led";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <127>;
+ };
+ backlight {
+ label = "fsl_backlight";
+ pwms = <&pwm0 3 10000000 1>;
+ max-brightness = <100>;
+ };
+};
--
1.8.0



\
 
 \ /
  Last update: 2013-08-21 05:21    [W:0.301 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site