lkml.org 
[lkml]   [2013]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: arm: Only load TLS values when needed
Hi André

(I've put RMK and LAKML back on Cc: they got dropped somewhere along the
way)

On 14/08/13 22:21, André Hentschel wrote:
>>>>> [...]
>>>>>>> Now we've only got one instruction between the store and the load
>>>>>>> and risk stalling the pipeline...
>>>>>>>
>>>>>>> Dave M cautiously says "The ancient advice was that one instruction
>>>>>>> was enough" but this is very core dependent... I wonder if anyone
>>>>>>> has a good idea about whether this is an issue here...?
>>>>>>
>>>>>> We could use a ldrd at the top, that'd be nearly what we have right
>>>>>> now, don't we?
>>>>>
>>>>> Yea, that'd be good - as far as I can see from an 1136 TRM, the ldrd *may* be two cycles (depending on alignment of the words) but the ldr and ldrne will always be two cycles. Ahhh, the joys of modifying the fast path ;)
>>
>> Was expecting to see something that reflected this discussion,
>
> Ah ok, i misunderstood that, sry.
> Something like that?
>
> From: André Hentschel <nerv@dawncrow.de>
>
> This patch intents to reduce loading instructions when the resulting value is not used.
> It's a follow up on a4780adeefd042482f624f5e0d577bf9cdcbb760
>

You caught me just before running away for a week of holiday, but I've
managed to squeeze in a bit of testing - hope this helps - I'll try to
be clear about what I have/haven't tested so you can judge for yourself
how much weight to give this.

What I've tested:

* Apply your code to 3.11-rc5
* Boot on Integrator CP (1176 r1p0) and run a full Debian Wheezy init

--> It works!

I also applied the following diff and rebuilt to check that we were
really testing the V6 NOT V6K path here:

diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index 31743f7..71dfe82 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -43,6 +43,7 @@
#define switch_tls switch_tls_v6
#elif defined(CONFIG_CPU_32v6K)
#define tls_emu 0
+#error
#define has_tls_reg 1
#define switch_tls switch_tls_v6k
#else
What I've *not* tested:
* As this CPU does not have the tls register, I haven't run any tests
that try to read/write it, but we wouldn't expect that to work, right?
* Haven't tried a V7 platform, as I understand you've already done that.
* Haven't verified it still builds for v4 (which was the problem for
ldrd in the past and now we've put it back, so that's important)
* Performance impact

I think it'd be good if you can verify the bottom two points -
especially the ldrd one: perhaps Russell can tell you which platform it
broke on before?

So, that's a
Tested-by: Jonathan Austin <jonathan.austin@arm.com>

If you want it :)
Hope that helps,

Jonny

> Signed-off-by: André Hentschel <nerv@dawncrow.de>
>
> ---
> This patch is against 28fbc8b6a29c849a3f03a6b05010d4b584055665
>
> diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
> index 83259b8..31743f7 100644
> --- a/arch/arm/include/asm/tls.h
> +++ b/arch/arm/include/asm/tls.h
> @@ -3,29 +3,31 @@
>
> #ifdef __ASSEMBLY__
> #include <asm/asm-offsets.h>
> - .macro switch_tls_none, base, tp, tpuser, tmp1, tmp2
> + .macro switch_tls_none, prev, next, tp, tpuser, tmp1, tmp2
> .endm
>
> - .macro switch_tls_v6k, base, tp, tpuser, tmp1, tmp2
> + .macro switch_tls_v6k, prev, next, tp, tpuser, tmp1, tmp2
> + ldrd \tp, \tpuser, [\next, #TI_TP_VALUE] @ get the next TLS and user r/w register
> mrc p15, 0, \tmp2, c13, c0, 2 @ get the user r/w register
> mcr p15, 0, \tp, c13, c0, 3 @ set TLS register
> mcr p15, 0, \tpuser, c13, c0, 2 @ and the user r/w register
> - str \tmp2, [\base, #TI_TP_VALUE + 4] @ save it
> + str \tmp2, [\prev, #TI_TP_VALUE + 4] @ save it
> .endm
>
> - .macro switch_tls_v6, base, tp, tpuser, tmp1, tmp2
> + .macro switch_tls_v6, prev, next, tp, tpuser, tmp1, tmp2
> + ldrd \tp, \tpuser, [\next, #TI_TP_VALUE]
> ldr \tmp1, =elf_hwcap
> ldr \tmp1, [\tmp1, #0]
> mov \tmp2, #0xffff0fff
> tst \tmp1, #HWCAP_TLS @ hardware TLS available?
> streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0
> - mrcne p15, 0, \tmp2, c13, c0, 2 @ get the user r/w register
> + mrcne p15, 0, \tmp2, c13, c0, 2 @ get the previous user r/w register
> mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register
> mcrne p15, 0, \tpuser, c13, c0, 2 @ set user r/w register
> - strne \tmp2, [\base, #TI_TP_VALUE + 4] @ save it
> + strne \tmp2, [\prev, #TI_TP_VALUE + 4] @ save it
> .endm
>
> - .macro switch_tls_software, base, tp, tpuser, tmp1, tmp2
> + .macro switch_tls_software, prev, next, tp, tpuser, tmp1, tmp2
> mov \tmp1, #0xffff0fff
> str \tp, [\tmp1, #-15] @ set TLS value at 0xffff0ff0
> .endm
> diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
> index d40d0ef..11112de 100644
> --- a/arch/arm/kernel/entry-armv.S
> +++ b/arch/arm/kernel/entry-armv.S
> @@ -689,12 +689,10 @@ ENTRY(__switch_to)
> THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
> THUMB( str sp, [ip], #4 )
> THUMB( str lr, [ip], #4 )
> - ldr r4, [r2, #TI_TP_VALUE]
> - ldr r5, [r2, #TI_TP_VALUE + 4]
> #ifdef CONFIG_CPU_USE_DOMAINS
> ldr r6, [r2, #TI_CPU_DOMAIN]
> #endif
> - switch_tls r1, r4, r5, r3, r7
> + switch_tls r1, r2, r4, r5, r3, r7
> #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
> ldr r7, [r2, #TI_TASK]
> ldr r8, =__stack_chk_guard
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-08-15 20:01    [W:0.046 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site