Messages in this thread Patch in this message | | | Date | Wed, 14 Aug 2013 18:42:27 +0100 | From | Lee Jones <> | Subject | Re: [PATCH 3/4] mfd: 88pm800: add device tree support |
| |
You need to Cc: devicetree@vger.kernel.org
Please insert a commit log.
> Signed-off-by: Chao Xie <chao.xie@marvell.com> > --- > Documentation/devicetree/bindings/mfd/88pm800.c | 55 +++++++++++++++++++++++ > drivers/mfd/88pm800.c | 55 +++++++++++++++++++++++ > 2 files changed, 110 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.c > > diff --git a/Documentation/devicetree/bindings/mfd/88pm800.c b/Documentation/devicetree/bindings/mfd/88pm800.c > new file mode 100644 > index 0000000..2299752 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/88pm800.c > @@ -0,0 +1,55 @@ > +* Marvell 88PM800 Power Management IC > + > +Required parent device properties: > +- compatible : "marvell,88pm800" > +- reg : the I2C slave address for the 88pm800 chip > +- interrupts : IRQ line for the 88pm800 chip > +- interrupt-controller: describes the 88pm800 as an interrupt controller (has its own domain)
You don't need "(has its own domain)", as this is expected.
> +- #interrupt-cells : should be 1. > + - The cell is the 88pm800 local IRQ number
No need for the last line.
> +Optional parent device properties: > +- marvell,88pm800-irq-write-clear: inicates whether interrupt status is cleared by write > +- marvell,88pm800-battery-detection: indicats whether need 88pm800 to support battery > + detection or not.
Not sure what these are. This is why you need to CC the Device Tree guys.
> +88pm800 consists of a large and varied group of sub-devices:
Really? Or just 3?
> +Device Supply Names Description > +------ ------------ ----------- > +88pm80x-onkey : : On key > +88pm80x-rtc : : RTC > +88pm80x-regulator : : Regulators
If more than 3 please list them.
> +Example: > + > + pmic: 88pm800@30 { > + compatible = "marvell,88pm800"; > + reg = <0x30>; > + interrupts = <0 4 0x4>;
Use the defines in include/dt-bindings.
> + interrupt-parent = <&gic>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + marvell,88pm800-irq-write-clr; > + > + regulators { > + compatible = "marvell,88pm80x-regulator"; > + > + BUCK1 { > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3950000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + LDO1 { > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3950000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + rtc { > + compatible = "marvell,88pm80x-rtc"; > + }; > + }; > diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c > index d4d272f..07a24e2 100644 > --- a/drivers/mfd/88pm800.c > +++ b/drivers/mfd/88pm800.c > @@ -27,6 +27,7 @@ > #include <linux/mfd/core.h> > #include <linux/mfd/88pm80x.h> > #include <linux/slab.h> > +#include <linux/of_device.h> > > /* Interrupt Registers */ > #define PM800_INT_STATUS1 (0x05) > @@ -121,6 +122,12 @@ static const struct i2c_device_id pm80x_id_table[] = { > }; > MODULE_DEVICE_TABLE(i2c, pm80x_id_table); > > +static const struct of_device_id pm80x_dt_ids[] = { > + { .compatible = "marvell,88pm800", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, pm80x_dt_ids); > + > static struct resource rtc_resources[] = { > { > .name = "88pm80x-rtc", > @@ -133,6 +140,7 @@ static struct resource rtc_resources[] = { > static struct mfd_cell rtc_devs[] = { > { > .name = "88pm80x-rtc", > + .of_compatible = "marvell,88pm80x-rtc", > .num_resources = ARRAY_SIZE(rtc_resources), > .resources = &rtc_resources[0], > .id = -1, > @@ -151,6 +159,7 @@ static struct resource onkey_resources[] = { > static struct mfd_cell onkey_devs[] = { > { > .name = "88pm80x-onkey", > + .of_compatible = "marvell,88pm80x-onkey", > .num_resources = 1, > .resources = &onkey_resources[0], > .id = -1, > @@ -160,6 +169,7 @@ static struct mfd_cell onkey_devs[] = { > static struct mfd_cell regulator_devs[] = { > { > .name = "88pm80x-regulator", > + .of_compatible = "marvell,88pm80x-regulator", > .id = -1, > }, > }; > @@ -538,14 +548,58 @@ out: > return ret; > } > > +static int pm800_dt_init(struct device_node *np, > + struct device *dev, > + struct pm80x_platform_data *pdata) > +{ > + pdata->irq_mode = > + !of_property_read_bool(np, "marvell,88pm800-irq-write-clear"); > + pdata->batt_det = > + of_property_read_bool(np, "marvell,88pm800-battery-detection"); > + > + return 0; > +} > + > +
Why two /n's?
> static int pm800_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > int ret = 0; > struct pm80x_chip *chip; > struct pm80x_platform_data *pdata = client->dev.platform_data; > + struct device_node *node = client->dev.of_node; > struct pm80x_subchip *subchip; > > + if (IS_ENABLED(CONFIG_OF)) { > + if (!pdata) { > + pdata = devm_kzalloc(&client->dev, > + sizeof(*pdata), GFP_KERNEL); > + if (!pdata) > + return -ENOMEM; > + } > + ret = pm800_dt_init(node, &client->dev, pdata); > + if (ret) > + return ret; > + } else if (!pdata) { > + return -EINVAL; > + }
Replace with:
if (!pdata) { if (node) /* <blah> populate pdata with DT </blah> */ else return -EINVAL; }
> + /* > + * RTC in pmic can run even the core is powered off, and user can set > + * alarm in RTC. When the alarm is time out, the PMIC will power up > + * the core, and the whole system will boot up. When PMIC driver is > + * probed, it will read out some register to find out whether this > + * boot is caused by RTC timeout or not, and it need pass this > + * information to RTC driver. > + * So we need rtc platform data to be existed to pass this information. > + */ > + if (!pdata->rtc) { > + pdata->rtc = devm_kzalloc(&client->dev, > + sizeof(*(pdata->rtc)), GFP_KERNEL); > + if (!pdata->rtc) > + return -ENOMEM; > + } > + > ret = pm80x_init(client); > if (ret) { > dev_err(&client->dev, "pm800_init fail\n"); > @@ -612,6 +666,7 @@ static struct i2c_driver pm800_driver = { > .name = "88PM800", > .owner = THIS_MODULE, > .pm = &pm80x_pm_ops, > + .of_match_table = of_match_ptr(pm80x_dt_ids), > }, > .probe = pm800_probe, > .remove = pm800_remove,
-- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |