lkml.org 
[lkml]   [2013]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 4/4] ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
    Date
    The spi-s3c64xx device is also used on the s3c2416 and s3c2443 SoCs.
    The driver also already uses only generic dma-engine operations.

    Therefore add another elif to set the s3c24xx filter.

    Signed-off-by: Heiko Stuebner <heiko@sntech.de>
    ---
    arch/arm/plat-samsung/devs.c | 5 ++++-
    1 file changed, 4 insertions(+), 1 deletion(-)

    diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
    index 0f9c3f4..fab458f 100644
    --- a/arch/arm/plat-samsung/devs.c
    +++ b/arch/arm/plat-samsung/devs.c
    @@ -32,6 +32,7 @@
    #include <linux/ioport.h>
    #include <linux/platform_data/s3c-hsudc.h>
    #include <linux/platform_data/s3c-hsotg.h>
    +#include <linux/platform_data/dma-s3c24xx.h>

    #include <media/s5p_hdmi.h>

    @@ -1513,8 +1514,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
    pd.num_cs = num_cs;
    pd.src_clk_nr = src_clk_nr;
    pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
    -#ifdef CONFIG_PL330_DMA
    +#if defined(CONFIG_PL330_DMA)
    pd.filter = pl330_filter;
    +#elif defined(CONFIG_S3C24XX_DMAC)
    + pd.filter = s3c24xx_dma_filter;
    #endif

    s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
    --
    1.7.10.4


    \
     
     \ /
      Last update: 2013-08-14 16:21    [W:4.235 / U:0.340 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site