lkml.org 
[lkml]   [2013]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/5] PCI: mvebu: add support for reset on GPIO
On Wed, Aug 14, 2013 at 11:25:02AM +0200, Sebastian Hesselbarth wrote:
> On 08/14/2013 11:07 AM, Thierry Reding wrote:
> >On Tue, Aug 13, 2013 at 02:25:23PM +0200, Sebastian Hesselbarth wrote:
> >[...]
> >>diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> >[...]
> >>@@ -897,6 +904,30 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
> >[...]
> >>+ u32 reset_udelay = 20000;
> >[...]
> >>+ udelay(reset_udelay);
> >
> >udelay(20000) is probably not a good idea. You should probably use
> >something like usleep_range() or msleep() here. Also see:
> >
> > Documentation/timers/timers-howto.txt
>
> Thierry,
>
> thanks for mentioning this. I clearly got distracted from ms to us
> switch due to the different reset API convention. As the delay will
> be most likely 10ms+, we should change the above to
> msleep(reset_udelay/1000) instead.

I'll just go ahead and fix this up locally. No need to resend.

thx,

Jason.


\
 
 \ /
  Last update: 2013-08-14 14:21    [W:1.591 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site