lkml.org 
[lkml]   [2013]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/9] PCI: mvebu: move clock enable before register access
On 08/13/13 09:11, Thomas Petazzoni wrote:
> On Mon, 12 Aug 2013 20:46:47 +0200, Sebastian Hesselbarth wrote:
>> + port->clk = of_clk_get_by_name(child, NULL);
>> + if (IS_ERR(port->clk)) {
>> + dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
>> + port->port, port->lane);
>> + iounmap(port->base);
>
> You shouldn't iounmap() here in case of error, since the register
> mapping hasn't been done yet.

Dooh, it was in my testing branch, but I failed to transfer that when
separating the changes to single patches. Will update.

>> + port->haslink = 0;
>> + continue;
>> + }
>> + clk_prepare_enable(port->clk);
>
> Nitpick, an empty new line between the closing } and the
> clk_prepare_enable() line would be nice.

Ok, as Theirry mentioned to check for clk_prepare_enable's return value
that would give a new "if (..)" anyway. Although, it might be the first
driver ever checking for this return value ;)

>> +
>> port->base = mvebu_pcie_map_registers(pdev, child, port);
>> if (!port->base) {
>> dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
>> @@ -916,22 +926,9 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
>> port->port, port->lane);
>
> and maybe here you could unprepare+release the clock if we haven't
> managed to remap registers?

Ack.

Sebastian


\
 
 \ /
  Last update: 2013-08-13 11:41    [W:0.056 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site