lkml.org 
[lkml]   [2013]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] regulator: palmas: Update the DT binding doc for smps10 out1 and out2
Date
Palams regulator SMPS10 is splitted into two regulator SMPS10-OUT1 and
SMPS10-OUT2 to match with hw behavior. With this regulator name got
changed in driver.

Update the DT binding document to match with driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
.../devicetree/bindings/regulator/palmas-pmic.txt | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 30b0581..794d13d 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -25,8 +25,8 @@ Optional nodes:
Additional custom properties are listed below.

For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
- smps45, smps457, smps7 depending on variant, smps6, smps[8-10],
- ldo[1-9], ldoln, ldousb.
+ smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
+ mps10_out2, smps10_out1, do[1-9], ldoln, ldousb.

Optional sub-node properties:
ti,warm-reset - maintain voltage during warm reset(boolean)
--
1.7.1.1


\
 
 \ /
  Last update: 2013-08-13 09:41    [W:0.048 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site