lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] ARM: OMAP2+: hwmod-data: Add SSI information
* Sebastian Reichel <sre@debian.org> [130811 09:25]:
> From: Sebastian Reichel <sre@ring0.de>
>
> This patch adds Synchronous Serial Interface (SSI) hwmod support for
> OMAP34xx SoCs.

This should be queued or acked by Paul.

Regards,

Tony

> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 104 ++++++++++++++++++++++++++++
> 1 file changed, 104 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> index 0c3a427..74006c4 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -3693,6 +3693,109 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +/*
> + * 'ssi' class
> + * synchronous serial interface (multichannel and full-duplex serial if)
> + */
> +
> +static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
> + SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
> + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
> + MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
> + .name = "ssi",
> + .sysc = &omap34xx_ssi_sysc,
> +};
> +
> +static struct omap_hwmod_irq_info omap34xx_ssi_irqs[] = {
> + { .name = "ssi_p1_mpu_irq0", .irq = 67 },
> + { .name = "ssi_p1_mpu_irq1", .irq = 68 },
> + { .name = "ssi_p2_mpu_irq0", .irq = 69 },
> + { .name = "ssi_p2_mpu_irq1", .irq = 70 },
> + { .name = "ssi_gdd_mpu", .irq = 71 },
> + { .irq = -1 },
> +};
> +
> +static struct omap_hwmod_addr_space omap34xx_ssi_addrs[] = {
> + {
> + .name = "sys",
> + .pa_start = 0x48058000,
> + .pa_end = 0x48058fff,
> + .flags = ADDR_TYPE_RT,
> + },
> + {
> + /* generic distributed DMA */
> + .name = "gdd",
> + .pa_start = 0x48059000,
> + .pa_end = 0x48059fff,
> + .flags = ADDR_TYPE_RT,
> + },
> + {
> + /* port 1: synchronous serial transmitter */
> + .name = "p1_sst",
> + .pa_start = 0x4805a000,
> + .pa_end = 0x4805a7ff,
> + .flags = ADDR_TYPE_RT,
> + },
> + {
> + /* port 1: synchronous serial receiver */
> + .name = "p1_ssr",
> + .pa_start = 0x4805a800,
> + .pa_end = 0x4805afff,
> + .flags = ADDR_TYPE_RT,
> + },
> + {
> + /* port 2: synchronous serial transmitter */
> + .name = "p2_sst",
> + .pa_start = 0x4805b000,
> + .pa_end = 0x4805b7ff,
> + .flags = ADDR_TYPE_RT,
> + },
> + {
> + /* port 2: synchronous serial receiver */
> + .name = "p2_ssr",
> + .pa_start = 0x4805b800,
> + .pa_end = 0x4805bfff,
> + .flags = ADDR_TYPE_RT,
> + },
> + {}
> +};
> +
> +static struct omap_hwmod omap34xx_ssi_hwmod = {
> + .name = "ssi",
> + .class = &omap34xx_ssi_hwmod_class,
> + .clkdm_name = "l3_init_clkdm",
> + .mpu_irqs = omap34xx_ssi_irqs,
> + .main_clk = "ssi_ssr_fck",
> + .prcm = {
> + .omap2 = {
> + .prcm_reg_id = 1,
> + .module_bit = OMAP3430_EN_SSI_SHIFT,
> + .module_offs = WKUP_MOD,
> + .idlest_reg_id = 1,
> + .idlest_idle_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT,
> + },
> + },
> +};
> +
> +/* SSI -> l3 */
> +static struct omap_hwmod_ocp_if omap34xx_l3__ssi = {
> + .master = &omap3xxx_l3_main_hwmod,
> + .slave = &omap34xx_ssi_hwmod,
> + .clk = "ssi_ick",
> + .addr = omap34xx_ssi_addrs,
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
> &omap3xxx_l3_main__l4_core,
> &omap3xxx_l3_main__l4_per,
> @@ -3818,6 +3921,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
> #ifdef CONFIG_OMAP_IOMMU_IVA2
> &omap3xxx_l3_main__mmu_iva,
> #endif
> + &omap34xx_l3__ssi,
> NULL
> };
>
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2013-08-12 11:01    [W:0.103 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site