lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: dwc3: core: clarify usb-phy array binding
On Fri, Aug 09, 2013 at 01:42:15PM -0500, Kumar Gala wrote:
>
> On Aug 9, 2013, at 11:28 AM, Mark Rutland wrote:
>
> > On Fri, Aug 09, 2013 at 04:40:32PM +0100, Kumar Gala wrote:
> >> The binding spec wasn't clear that the order of the phandles in the
> >> usb-phy array has meaning. Clarify this point in the binding that
> >> it should be <USB2-HS-PHY, USB3-SS-PHY>.
> >>
> >> Signed-off-by: Kumar Gala <galak@codeaurora.org>
> >> ---
> >> Documentation/devicetree/bindings/usb/dwc3.txt | 4 +++-
> >> 1 file changed, 3 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> >> index 7a95c65..8a9770b 100644
> >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> >> @@ -6,7 +6,9 @@ Required properties:
> >> - compatible: must be "synopsys,dwc3"
> >> - reg : Address and length of the register set for the device
> >> - interrupts: Interrupts used by the dwc3 controller.
> >> - - usb-phy : array of phandle for the PHY device
> >> + - usb-phy : array of phandle for the PHY device. The first element
> >> + in the array is expected to be a handle to the USB2/HS PHY and
> >> + the second element is expected to be a handle to the USB3/SS PHY
> >
> > Just to check - it's not valid to have a USB3 phy without a USB2 phy?
>
> Don't know, hopefully Felipe will chime in on that.

that'd be a really non-standard implementation. Per-spec, USB3 is
*always* backwards compatible with USB2.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-08-12 20:21    [W:0.113 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site