lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 3/4] clk: sunxi: Add A31 clocks support
[Adding devicetree list to Cc]

Hi,

On Mon, Aug 05, 2013 at 09:43:00PM +0100, Maxime Ripard wrote:
> The A31 has a mostly different clock set compared to the other older
> SoCs currently supported in the Allwinner clock driver.
>
> Add support for the basic useful clocks. The other ones will come in
> eventually.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> Documentation/devicetree/bindings/clock/sunxi.txt | 6 +
> .../bindings/clock/sunxi/sun6i-a31-gates.txt | 83 ++++++++++++++
> drivers/clk/sunxi/clk-sunxi.c | 124 +++++++++++++++++++++
> 3 files changed, 213 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index b24de10..c383d12 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -8,6 +8,7 @@ Required properties:
> - compatible : shall be one of the following:
> "allwinner,sun4i-osc-clk" - for a gatable oscillator
> "allwinner,sun4i-pll1-clk" - for the main PLL clock
> + "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
> "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
> "allwinner,sun4i-axi-clk" - for the AXI clock
> "allwinner,sun4i-axi-gates-clk" - for the AXI gates
> @@ -15,6 +16,8 @@ Required properties:
> "allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
> "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
> "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
> + "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
> + "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
> "allwinner,sun4i-apb0-clk" - for the APB0 clock
> "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
> "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
> @@ -24,6 +27,9 @@ Required properties:
> "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
> "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
> "allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
> + "allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
> + "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
> + "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
>
> Required properties for all clocks:
> - reg : shall be the control register address for the clock.

This looks sensible, but I have a couple of questions below:

> diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
> new file mode 100644
> index 0000000..fe44932
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
> @@ -0,0 +1,83 @@
> +Gate clock outputs
> +------------------
> +
> + * AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
> +
> + MIPI DSI 1
> +
> + SS 5
> + DMA 6
> +
> + MMC0 8
> + MMC1 9
> + MMC2 10
> + MMC3 11
> +
> + NAND1 12
> + NAND0 13
> + SDRAM 14
> +
> + GMAC 17
> + TS 18
> + HSTIMER 19
> + SPI0 20
> + SPI1 21
> + SPI2 22
> + SPI3 23
> + USB_OTG 24
> +
> + EHCI0 26
> + EHCI1 27
> +
> + OHCI0 29
> + OHCI1 30
> + OHCI2 31
> + VE 32
> +
> + LCD0 36
> + LCD1 37
> +
> + CSI 40
> +
> + HDMI 43
> + DE_BE0 44
> + DE_BE1 45
> + DE_FE1 46
> + DE_FE1 47
> +
> + MP 50
> +
> + GPU 52
> +
> + DEU0 55
> + DEU1 56
> + DRC0 57
> + DRC1 58
> +
> + * APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
> +
> + CODEC 0
> +
> + DIGITAL MIC 4
> + PIO 5
> +
> + DAUDIO0 12
> + DAUDIO1 13
> +
> + * APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
> +
> + I2C0 0
> + I2C1 1
> + I2C2 2
> + I2C3 3
> +
> + UART0 16
> + UART1 17
> + UART2 18
> + UART3 19
> + UART4 20
> + UART5 21
> +

Are those the specific names of the clock outputs, or just what they're
wired to on the A31? I noticed the a13 gate bindings mentioned a clock
called MALI400, which seemed awfully specific, but I don't have a
datasheet handy.

Does the binding cover all clocks (even if the driver doesn't yet
support them)? Is there any reason we can't document those clock names
and associated IDs in the binding now even if we can't yet drive them?

Thanks,
Mark.


\
 
 \ /
  Last update: 2013-08-12 16:41    [W:0.066 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site