lkml.org 
[lkml]   [2013]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] clk: sunxi: Add A31 clocks support
Hi Maxime,

El 30/07/13 11:44, Maxime Ripard escribió:
> The A31 has a mostly different clock set compared to the other older
> SoCs currently supported in the Allwinner clock driver.
>
> Add support for the basic useful clocks. The other ones will come in
> eventually.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> drivers/clk/sunxi/clk-sunxi.c | 120 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 120 insertions(+)
>
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index 6e9cbc9..8cd69e6 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -124,7 +124,67 @@ static void sun4i_get_pll1_factors(u32 *freq, u32 parent_rate,
> *n = div / 4;
> }
>
> +/**
> + * sun6i_get_pll1_factors() - calculates n, k and m factors for PLL1
> + * PLL1 rate is calculated as follows
> + * rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
> + * parent_rate should always be 24MHz
> + */
> +static void sun6i_get_pll1_factors(u32 *freq, u32 parent_rate,
> + u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> + /*
> + * We can operate only on MHz, this will make our life easier
> + * later.
> + */
> + u32 freq_mhz = *freq / 1000000;
> + u32 parent_freq_mhz = parent_rate / 1000000;
> +
> + /* If the frequency is a multiple of 32 MHz, k is always 3 */
> + if (!(freq_mhz % 32))
> + *k = 3;
> + /* If the frequency is a multiple of 9 MHz, k is always 2 */
> + else if (!(freq_mhz % 9))
> + *k = 2;
> + /* If the frequency is a multiple of 8 MHz, k is always 1 */
> + else if (!(freq_mhz % 8))
> + *k = 1;
> + /* Otherwise, we don't use the k factor */
> + else
> + *k = 0;
>
> + /*
> + * If the frequency is a multiple of 2 but not a multiple of
> + * 3, m is 3. This is the first time we use 6 here, yet we
> + * will use it on several other places.
> + * We use this number because it's the lowest frequency we can
> + * generate (with n = 0, k = 0, m = 3), so every other frequency
> + * somehow relates to this frequency.
> + */
> + if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4)
> + *m = 2;
> + /*
> + * If the frequency is a multiple of 6MHz, but the factor is
> + * odd, m will be 3
> + */
> + else if ((freq_mhz / 6) & 1)
> + *m = 3;
> + /* Otherwise, we end up with m = 1 */
> + else
> + *m = 1;
> +
> + /* Calculate n thanks to the above factors we already got */
> + *n = freq_mhz * (*m + 1) / ((*k + 1) * parent_freq_mhz) - 1;
> +
> + /*
> + * If n end up being outbound, and that we can still decrease
> + * m, do it.
> + */
> + if ((*n + 1) > 31 && (*m + 1) > 1) {
> + *n = (*n + 1) / 2 - 1;
> + *m = (*m + 1) / 2 - 1;
> + }
> +}

Nice! My rate-to-factors functions pale in comparison :) Remember that
n/k/m/p may be NULL when the caller just wants you to round freq to an
achievable value (see clk_factors_round_rate(...) in clk-factors.c).

> /**
> * sun4i_get_apb1_factors() - calculates m, p factors for APB1
> @@ -189,6 +249,15 @@ static struct clk_factors_config sun4i_pll1_config = {
> .pwidth = 2,
> };
>
> +static struct clk_factors_config sun6i_pll1_config = {
> + .nshift = 8,
> + .nwidth = 5,
> + .kshift = 4,
> + .kwidth = 2,
> + .mshift = 0,
> + .mwidth = 2,
> +};
> +
> static struct clk_factors_config sun4i_apb1_config = {
> .mshift = 0,
> .mwidth = 5,
> @@ -201,6 +270,11 @@ static const __initconst struct factors_data sun4i_pll1_data = {
> .getter = sun4i_get_pll1_factors,
> };
>
> +static const __initconst struct factors_data sun6i_pll1_data = {
> + .table = &sun6i_pll1_config,
> + .getter = sun6i_get_pll1_factors,
> +};
> +
> static const __initconst struct factors_data sun4i_apb1_data = {
> .table = &sun4i_apb1_config,
> .getter = sun4i_get_apb1_factors,
> @@ -243,6 +317,10 @@ static const __initconst struct mux_data sun4i_cpu_mux_data = {
> .shift = 16,
> };
>
> +static const __initconst struct mux_data sun6i_ahb1_mux_data = {
> + .shift = 12,
> +};
> +
> static const __initconst struct mux_data sun4i_apb1_mux_data = {
> .shift = 24,
> };
> @@ -301,6 +379,12 @@ static const __initconst struct div_data sun4i_apb0_data = {
> .width = 2,
> };
>
> +static const __initconst struct div_data sun6i_apb2_div_data = {
> + .shift = 0,
> + .pow = 0,
> + .width = 4,
> +};
> +
> static void __init sunxi_divider_clk_setup(struct device_node *node,
> struct div_data *data)
> {
> @@ -347,6 +431,10 @@ static const __initconst struct gates_data sun5i_a13_ahb_gates_data = {
> .mask = {0x107067e7, 0x185111},
> };
>
> +static const __initconst struct gates_data sun6i_a31_ahb1_gates_data = {
> + .mask = { 0xedfe7f62, 0x794f931 },
> +};
> +
> static const __initconst struct gates_data sun4i_apb0_gates_data = {
> .mask = {0x4EF},
> };
> @@ -363,6 +451,14 @@ static const __initconst struct gates_data sun5i_a13_apb1_gates_data = {
> .mask = {0xa0007},
> };
>
> +static const __initconst struct gates_data sun6i_a31_apb1_gates_data = {
> + .mask = { 0x3031 },
> +};
> +
> +static const __initconst struct gates_data sun6i_a31_apb2_gates_data = {
> + .mask = { 0x3f000f },
> +};
> +

We should decide on a style here and use it across the board, so far we
have definitions with and without spaces between constants and braces,
and constants both with upper and lower case A-F. Personally I don't
feel strongly about the spacing and prefer upper-case constants, but if
the style guide suggests otherwise, I can live with it (as long as we
use it consistently, that is)

> static void __init sunxi_gates_clk_setup(struct device_node *node,
> struct gates_data *data)
> {
> @@ -420,6 +516,10 @@ static const __initconst struct of_device_id clk_factors_match[] = {
> .data = &sun4i_pll1_data,
> },
> {
> + .compatible = "allwinner,sun6i-pll1-clk",
> + .data = &sun6i_pll1_data,
> + },
> + {
> .compatible = "allwinner,sun4i-apb1-clk",
> .data = &sun4i_apb1_data,
> },
> @@ -440,6 +540,10 @@ static const __initconst struct of_device_id clk_div_match[] = {
> .compatible = "allwinner,sun4i-apb0-clk",
> .data = &sun4i_apb0_data,
> },
> + {
> + .compatible = "allwinner,sun6i-apb2-div-clk",
> + .data = &sun6i_apb2_div_data,
> + },
> {}
> };
>
> @@ -453,6 +557,10 @@ static const __initconst struct of_device_id clk_mux_match[] = {
> .compatible = "allwinner,sun4i-apb1-mux-clk",
> .data = &sun4i_apb1_mux_data,
> },
> + {
> + .compatible = "allwinner,sun6i-ahb1-mux-clk",
> + .data = &sun6i_ahb1_mux_data,
> + },
> {}
> };
>
> @@ -471,6 +579,10 @@ static const __initconst struct of_device_id clk_gates_match[] = {
> .data = &sun5i_a13_ahb_gates_data,
> },
> {
> + .compatible = "allwinner,sun6i-a31-ahb1-gates-clk",
> + .data = &sun6i_a31_ahb1_gates_data,
> + },
> + {
> .compatible = "allwinner,sun4i-apb0-gates-clk",
> .data = &sun4i_apb0_gates_data,
> },
> @@ -486,6 +598,14 @@ static const __initconst struct of_device_id clk_gates_match[] = {
> .compatible = "allwinner,sun5i-a13-apb1-gates-clk",
> .data = &sun5i_a13_apb1_gates_data,
> },
> + {
> + .compatible = "allwinner,sun6i-a31-apb1-gates-clk",
> + .data = &sun6i_a31_apb1_gates_data,
> + },
> + {
> + .compatible = "allwinner,sun6i-a31-apb2-gates-clk",
> + .data = &sun6i_a31_apb2_gates_data,
> + },

Please see my comments on the first patch regarding these.

Thanks!

Emilio
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-07-31 03:41    [W:0.129 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site