[lkml]   [2013]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/8] wilink: add device tree support

This patch series adds device tree support to the wlcore_sdio driver,
which is used by WiLink6, WiLink7 and WiLink8.

The first patches do some clean-up to make the data needed in the
wilink device tree node smaller. The remaining patches implement the
actual device tree node parsing in wlcore_sdio.

Regarding the XTAL clock issues, for now we don't support XTAL mode
with DT, but I have sent a proposal for a small change in the clock
framework to support this, but it's still under discussions [1].

The DTS file changes will be sent separately, since they need to go
via different trees.

A new version of the bindings documentation has been sent [2] and, if
no more comments are given to it, I'll apply it via my tree.


Changes in v4:

* Rebased on top of 3.11-rc3 (eg. no more changes on the board files
that were removed);

* Use the new irq_get_trigger_type() instead of
irqd_get_trigger_type() (thanks Javier);

* Added some missing const's (thanks Felipe);

* Reverted Tony's workaround to get WiLink to work on Panda while DT
was not supported yet.

Please review.

Luciano Coelho (8):
wl1251: split wl251 platform data to a separate structure
wlcore: set irq_flags in the board files instead of hiding behind a
wlcore: remove pwr_in_suspend from platform data
wl12xx: use frequency instead of enumerations for pdata clocks
wlcore: add initial device tree support to the sdio module
wlcore: sdio: add wilink clock providers
wlcore: sdio: get clocks from device tree
wlcore/wl12xx: check if we got correct clock data from DT

arch/arm/mach-davinci/board-da850-evm.c | 11 ++-
arch/arm/mach-omap2/board-omap3evm.c | 22 ++++-
arch/arm/mach-omap2/board-omap3pandora.c | 4 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 33 +++++++-
arch/arm/mach-omap2/devices.c | 39 ---------
drivers/net/wireless/ti/wilink_platform_data.c | 37 ++++++--
drivers/net/wireless/ti/wl1251/sdio.c | 12 +--
drivers/net/wireless/ti/wl1251/spi.c | 2 +-
drivers/net/wireless/ti/wl12xx/main.c | 78 +++++++++++++++--
drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 +++++++
drivers/net/wireless/ti/wlcore/debugfs.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 20 ++---
drivers/net/wireless/ti/wlcore/sdio.c | 112 +++++++++++++++++++++++--
drivers/net/wireless/ti/wlcore/wlcore.h | 5 +-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 +
include/linux/wl12xx.h | 52 +++++-------
17 files changed, 340 insertions(+), 120 deletions(-)


 \ /
  Last update: 2013-07-30 15:21    [W:0.656 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site