lkml.org 
[lkml]   [2013]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c-designware: Manually set RESTART bit between messages

CCing Mika and Christian.

On Fri, Jun 21, 2013 at 03:05:28PM +0800, Chew Chiau Ee wrote:
> From: Chew, Chiau Ee <chiau.ee.chew@intel.com>
>
> If both IC_EMPTYFIFO_HOLD_MASTER_EN and IC_RESTART_EN are set to 1, the
> Designware I2C controller doesn't generate RESTART unless user specifically
> requests it by setting RESTART bit in IC_DATA_CMD register.
>
> Since IC_EMPTYFIFO_HOLD_MASTER_EN setting can't be detected from hardware
> register, we must always manually set the restart bit between messages.
>
> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>

How come restart has worked before? Or did it not?

> ---
> drivers/i2c/busses/i2c-designware-core.c | 14 ++++++++++++++
> 1 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
> index 3de5494..9348439 100644
> --- a/drivers/i2c/busses/i2c-designware-core.c
> +++ b/drivers/i2c/busses/i2c-designware-core.c
> @@ -403,6 +403,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
> u32 addr = msgs[dev->msg_write_idx].addr;
> u32 buf_len = dev->tx_buf_len;
> u8 *buf = dev->tx_buf;
> + bool need_restart = false;
>
> intr_mask = DW_IC_INTR_DEFAULT_MASK;
>
> @@ -430,6 +431,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
> /* new i2c_msg */
> buf = msgs[dev->msg_write_idx].buf;
> buf_len = msgs[dev->msg_write_idx].len;
> +
> + /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
> + * IC_RESTART_EN are set, we must manually
> + * set restart bit between messages.
> + */
> + if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
> + (dev->msg_write_idx > 0))
> + need_restart = true;
> }
>
> tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
> @@ -448,6 +457,11 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
> buf_len == 1)
> cmd |= BIT(9);
>
> + if (need_restart) {
> + cmd |= BIT(10);
> + need_restart = false;
> + }
> +
> if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
>
> /* avoid rx buffer overrun */
> --
> 1.7.4.4
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-07-03 22:21    [W:0.054 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site