lkml.org 
[lkml]   [2013]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal
On 07/26/2013 08:17 PM, Bin Liu wrote:

Hi Bin.

>> In TI 3.2 kernel, the otg_timer() toggles the SESSION bit in
>> OTG_STATE_B_IDLE state. So whenever the ID pin is grounded by
>> connecting a device, the controller will try go into host mode.
>> But I have no idea why your board is in a_idle not b_idle. The toggle
>> does not handle a_idle.
>>
>> Do you use the AM335x GP EVM, not the smaller StarterKit EVM, right?
>> the USB0 port on SK EVM is device only.
>>
>> But anyway, I have not seen any use case which uses micro-AB
>> receptacle and requires such dynamic role switching. So I kind of
>
> I meant the real customer use cases, not the EVMs ;)
>
I am using the about the second port on am335x evm which is used as
host (not OTG mode (3) but HOST (1)). If I start the timer OTG after
disconnect I see that it gets back to A mode:

[ 97.570852] musb-hdrc musb-hdrc.1.auto: Poll devctl 19 (a_wait_bcon)
[ 99.570306] musb-hdrc musb-hdrc.1.auto: Poll devctl 98 (a_idle)

[ 209.570259] musb-hdrc musb-hdrc.1.auto: Poll devctl 80 (a_idle)

and now the session bit is missing and never gets back so I can not
plug any other device. I really have no idea what is missing here…

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-07-26 20:41    [W:0.231 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site